forgive me for high jacking the thread.... prior to building them I was running 750 in the surf rear compartment, 750 on the surf side floor and 1100 in the playpen compartment @11mph. Now I run 750 on the surf side rear compartment, 350 on the non surf side rear compartment and 9.8mph on the goofy side, 10.5 on the regular side. This gives no noticeable lean. The gate isn't noticeable to handling until you get to about idle then it won't turn sharp against the gate. Ive had a noticeable savings in fuel due to the lower speed and weight. Also I like the idea of no lean with regards to oil delivery.
This is my build thread on the Supra forum.
http:// http://www.supraboats.com/bb...urf-Gate-Build