Best wakesurf setup for a 2019 Craz?

When wakesurfing, what is the best setup for a stock 2019 Moomba Craz? We're beginners looking for a longer sweet spot than what we are currently producing.

For me I find 11mph to get the best combo of height and length of the pocket.

For goofy foot I get around 10° of pitch and 5° of roll with my surf plate on the port at 65%and then for natural foot, the roll is closer to 3.5° with the starboard plate at 55%

Wake plate at 15% for a crew of 4 or more and 0% is only 2 or 3.

Also if you can have the boat slightly turning AWAY from the rider so you aren’t going totally straight. That really helps shape the wave for my height and curl.

I have 1100’s in the rear lockers and center tank and now bag full.

I also use a 400lb across the rear seat and one on the surf side when I have a small crew of 2 or 3.


Sent from my iPhone using Tapatalk

See thread a few topics down too


Sent from my iPhone using Tapatalk

Here are my autowake settings. This produces a great wave with stock ballast. You still need to offset people to the surf side, or add lead wake.

https://uploads.tapatalk-cdn.com/201...407aec4301.jpghttps://uploads.tapatalk-cdn.com/201...787cbe11dd.jpg


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by Stazi

For me I find 11mph to get the best combo of height and length of the pocket.

Wake plate at 15% for a crew of 4 or more and 0% is only 2 or 3.

Sent from my iPhone using Tapatalk

---

Stazi what is your thought process on reducing the wake plate from 15% to 0% with less people?

Quote:

---

Originally Posted by Snowslydder

Stazi what is your thought process on reducing the wake plate from 15% to 0% with less people?

---

Yes, when the crew is small is seems to be better with the wakeplate at 0. Remember the wakeplate can clean up the wake, but any amount of deployment WILL diminish the wave size. I prefer to speed up the boat to clean and extend the wave, rather than deploy the wakeplate, so long as the ride is not a beginner and is able to control their speed well, and speed up accordingly.

I will try that out next time. Thanks

So where exactly are you putting the 500lb lead ballast if you surf normal (port side)?

Quote:

---

Originally Posted by bteeter

So where exactly are you putting the 500lb lead ballast if you surf normal (port side)?

---

Interested to hear this too. We have 200# under each rear bag, and 100# evenly distributed in the bow


Sent from my iPhone using Tapatalk

I have it split evenly side to side. 250# each.

I sit 200 # right in front of the rear bags on both sides. Spread out 2x2 and then 50# behind each leg of the front v-bag.


Sent from my iPhone using Tapatalk