Printable View
Well, this is my first summerization for this boat. Wish me luck. I plan on using the homemade fake-a-lake like others made here. I am going to reinstall the plugs, hook the hoses up (if necessary), hook the battery up and charge it and replace the impeller. I'm also going to clean the hell out of it and wax it. I will also inspect the trailer and tires.
Is there anything I should add to this list? :)
Fresh fuel, is the oil changed?
Oil was changed at winterization. Fuel had stabil added to it at the same time.
You my friend should be "Good to Go: :)
Gracias, senor. I will try and post pics of the impeller R&R for everyone. Although, mine's a DD so it looks pretty darn easy. (Knock on wood - wait, there's no wood in a Moomba!)Quote:
Originally Posted by sled491
The impellor can be a bit frusturating, but stick with it and try to work it from all sides and it will come.
Where do you get the parts to make the kit for the fake a lake.
It is a great idea!!!!
Want to make sure that the XLV will be ready when we are!!!!
THANKS FOR THE HELP!!!
;)
Search is your friend.Quote:
Originally Posted by kennedy
https://forum.moomba.com/showthread....ight=fake+lake
hitting the lake for the first outing of the year this afternoon.
batteries charged, oil done, washed and waxed, bearings ok, impeller changed 40hrs ago late last summer, so plan on doing it later this spring. full tank with stabil in it.
hoping for a good start at the launch. always cringe the first time out to see if it'll start as you are launching it. lots of white smoke for a minute from the fog, but then good to go...
oh yea, don't ever forget..... rear plug installed :)
yea, i should learn to read.
i did look at the post.
THANKS!!!
No problem. I just started everything. I've got all the hoses reinstalled.Quote:
Originally Posted by kennedy
I'm now trying to see where the block plugs go and I need to reinstall the strainer.
After that, I'm going to R&R the impeller. I will take pics of this procedure.
Making progress:)
No lake today, best I can hope for is a pull at the Cable park by the airport here in Orlando. My flight isn't until 4:30 so I'm good to go!
Sweet.
Okay, can someone help me find where I screw in the plastic strainer? I, for the life of me, do not see where it goes. Also, do the two drain plugs go on the aft end of the motor below the transmission fill? I can feel a hole on either side but it doesn't seem like they want to screw in. I need to go get a telescoping mirror to take a look.
I have a Direct Drive. Well, I guess I'll do the impeller now while the experts confer and give me a recommendation. :)
I got the impeller done. That was easy.
I also found the water strainer.
So, now if someone can post a pic or something showing me where the two brass drain plugs go, I'll be ready to fire her up (with the DIY Fake-a-lake, of course).
I have a V-drive, but I assume the drain plugs are in the same in the engine on a DD. If you look at the winterization pictures in the following post, you'll see where the port side plug is in the 6th picture (and water coming out of the hole in the 7th picture):
https://forum.moomba.com/showthread....ight=winterize
PERFECT. Thank you very much.Quote:
Originally Posted by WolfpackRider
And, all done.
Now, I need to do a test with the Fake-a-lake and wash it. Thanks for everyone's input and help.
One question on the fake-a-lake. There's two intakes under the boat. Do I use the aft or forward to run the engine? Or, does it matter? Thanks!
(Direct Drive)
One is for the ballast and one is for the motor. It should be the one on the port side just infront of the strut. It will also be the one that feeds the strainer.
Thanks! I was using the one for ballast.Quote:
Originally Posted by sled491
One way to test is to undo the strainer cup, turn on the garden hose on the fake lake and see if water comes out or not.
Why yes, that is quite obvious now that you say it!Quote:
Originally Posted by sled491
I'm nothing if not obvious:)
http://www.juddemerson.com/Moomba/old_impeller.jpg
http://www.juddemerson.com/Moomba/impeller_removed.jpg
I only had to use one set of needle nose pliers to pull it out.
http://www.juddemerson.com/Moomba/im..._installed.jpg
Requisite beer in the Moomba coozy
http://www.juddemerson.com/Moomba/moomba_cerveza.jpg
gotta love the suction cuzzie tool:)
Dos Equis? In the moomba coozie
Yes. After all of the maintenance tasks, I washed the boat and wiped down all of the vinyl. Of course, the longer I work on the boat the more beer I drink. It's a win, win.Quote:
Originally Posted by jmvotto
Gotta say the access you have to the impellar makes it way to easy. Just for fun you should try a 03 lsv--you'll need a case of beer:rolleyes:
Well, thanks to sled and others, I took the boat out for its first run. For peace of mind, I let it idle on the trailer while in the water and I let it warm up to operating temp. It stayed around 150ish degrees and everything was great. So, I took it out and ran around for about a half hour and hung out for another half hour. It was windy as hell so I didn't want to stay out very long. Anyway, everything went great and I appreciate everyone's help.
Judd
Dude, that's what were here for:)
Anybody have any advice to get rid of the snow in Montana? Pulled the boat out of the garage two weeks ago and I am getting tired of having to brush the snow off the cover.
Great advice in this thread, just not sure i want to risk it yet.......low was 38 last night.
OK and try to follow.Quote:
Originally Posted by montanamoomba
1st. put house for sale
2nd load moving truck
3rd hook boat to truck
4th move to florida or somewhere south.
4a if 4 is not working for you try global warming :)
Quote:
Originally Posted by sled491
Sled, when ya going to follow your own idea's-
I wont even mention the water temp this past weekend. but if we dont get rain soon i may just have to bring the boat north with me in june:rolleyes:
Daze, I just can't seem to unstick my feet:) My lake is about 8 inches high right now. We are dangerously close to being shut down again. Good for diving bad for watersports behind the Ole Moomba. Which by the way found it's way to the lift this weekend finally.
No need to bring boat, just show up!
Hey Sled, how about a photo of the boat on the lake now that its wrapped.
I'm in Toronto until friday (big surprise right). But will get the pic this coming weekend. I was half tempted to do it last weekend but for some strange reason I didn't