ok guys the forum is here and we need pics and discriptions--photo by photo of your mods, if you dont have any -go do something to your moomba;)
Printable View
ok guys the forum is here and we need pics and discriptions--photo by photo of your mods, if you dont have any -go do something to your moomba;)
NICE! This makes me want to get some of my projects done.
Me too. As I have a bunch of old ones as well as ones I'm currently working on. Thanks folks for this!
Wow. It's so roomy in here. We really need to do something with the place. About all I have on the agenda is some pop up cleats I never installed last summer and maybe add an amp.
Kaneboats, do you have any cleats at all now? I know that I just LOVE ours. I think the pop up cleats and the Z-Cargo are my two favorite options. I don't even know how I got along without them on the MC for so long.
Oh, I have to install the lights that Eliza won at the Tampa Jam...
I have lots of great pictures. I just need to post them. Great forum. I am sure everyone can benefit and get great ideas from this page. Good work.
I'll round up all the pics of what i've done and post 'em. I wonder if we can just move old post that are already here on these subjects? :confused:
Wow, KB is right it is bright and roomy in here. I guess I'll have to get moving on some of my projects as well. Very efficient work people, congrats!
Wow that was quick. I have to admit I didn't even notice it at first. I guess this means I have to start saving all my pennies for all the things I'm going to end up doing.
I wanted to thank everyone especially Ed G, for the help and suggestions. I also want to thank in advance all of you brave modifiers who undertake your projects while the rest of us wait to see if it works before we try it.
Thank You!
I will add a few that I think I have posted in the past here... (none that exciting)
First... Spare Trailer Tire Bracket
and... 2 double Dbot5 surf racks and Dbot5 Boomerang Lights (got a killer deal on ebay... had to fix that whole "they catch fire thing")
FAE... 'nough said ...
Fusion Wake P-Series Mirror Arm with Moster Tower Adapter to use with OEM Mirror
Nice work Adsman, I really like the graphics on you bow by the way, very cool
Split Ballast lines to allow 750 and 400 bag to be filled with Stock Gravity III ballast pumps...
Adsman,
GENIUS idea on the ballast set up.. How well does it drain?
Parts list? I have been contemplating an upgrade to gravity iv as shown on here by a couple of users, but that is genius. I have some extra bags I could probably put under the console to do this.
BW
Fills and drains no problem. Keep in mind, you can fill with both valves open, but you have to switch the valves to empty each bag separately... good thing is you dont have to have to disconnect anything... it is slow though, since you are filling 2 bags with one pump.
PARTS:
FLEXPVC
(Measure to Length as needed... bought a 50FT roll for like $30-$40)
I got my flexpvc online http://www.flexpvc.com (since the supplier was local to me and it was BY FAR THE CHEAPEST OPTION)... i have seen it at Home Depot since i did this.... also, i guess you could get it from a dealer... but i would guess it would be real expensive...
NOTE: my first prototype i used that clear reinforced tubing (like this http://cracklecdn-e7.simplecdn.net/i...LP/ALP0072.jpg ) instead of flexpvc, and kinking and collapsing during draining was a huge problem
SPLITTERS VALVES
Needed 2 garden hose splitters... had lots of metal ones at the Depot.... but went with Plastic.... http://ecx.images-amazon.com/images/...500_AA280_.jpg
cost a couple bucks
GARDEN HOSE "COUPLER"
Needed 4 Female connections and 2 Males.... cost a couple bucks
something like this http://images.hardwareandtools.com/P/1389006.jpg
note: the couplers came with plastic clamps, but i figured the stainless steel would give me the best ability to tighten down the flexpvc (since the flex pvc is way less flexible than garden hose)
HOSE CLAMPS
10 Stainless steel Hose Clamps... got a whole bag of them at the depot for cheap
FLY HIGH QUICK DISCONNECTS
4 Right Angle Quick Disconnects... got them from the local board shop.... coulda gotem cheaper online... think i paid like $5-7 bucks a piece
I also bought some plastic hose hangers to secure the ballast lines to the hull.... but I never got around to doing it and they dont get in the way as they are now...
thats it!
May i suggest that everyone who posts here starts a new thread instead of posting their mods into this thread. That will make it a lot easier two ways, searching and replying to certain topics. Replying here will only make it a nightmare of confusion.
Or as another suggestion, if someone starts a Ballast thread then we can all post up or ballast mods, or a thread for stereo mods, rack mods, etc.
Any other ideas?