Anyone have Moomba Step Plates?

I noticed that the Supra Gravity Games brochure boat has step plates/pads from the factory, I'd love to add these to my boat, but it doesn't appear to be something I can get direct from Skiers Choice.

This is what I'm referring to;
https://forum.moomba.com/attachment....1&d=1213729899


I've found these, but they look too cheezy, I want something nice, like machined aluminium or stainless;
http://www.westmarine.com/webapp/wcs...1&classNum=162




Does anyone have any suggestions or know of anything? I think something with the Moomba logo would be even better!

ian, i now someone who got a set of the no slip pads for the trailer fenders-they were cut out and said moomba on them and put them in the same location-actually looked good

Ian, I have looked for the same and came up empty. I found this but haven't gone any further.

-M

http://shopping.rexmar.com/Merchant2..._Code=steppads

Quote:

---

Originally Posted by moombadaze

ian, i now someone who got a set of the no slip pads for the trailer fenders-they were cut out and said moomba on them and put them in the same location-actually looked good

---

Hmm, I'll have to look in to that! I don't know if my trailer has no-slip pads on it, but worth checking in to...

Quote:

---

Originally Posted by McMoomba

Ian, I have looked for the same and came up empty. I found this but haven't gone any further.

-M

http://shopping.rexmar.com/Merchant2..._Code=steppads

---

Very cool, if I can't find something with the Moomba logo I think I'll go with these. Anything is better than having people step on my fiberglass!

I'll have some made for you guys with the Moomba Logo engraved in them. Give me an idea of the size and what price you'd be willing to spend. I invision them being billet aluminum about 3 inches by 6 or 8 inches. Chromed or electric polished (ie like the board racks finish) Let me know......................


Aqua

I bought a bulk piece of 3mm thick Seadek and cut 40+" long strips 2.75" wide and stuck them on the tops of the gunnels. It actually matches the Moomba platinum exactly. Goes from the tower legs to the gas fill or thereabouts. NO feet can touch the 'glass at all and it looks killer. :D

Ian
Contact parts guru Anthony Cooper at Skiers Choice.. see if it is available...

Quote:

---

Originally Posted by Aquaholic

I'll have some made for you guys with the Moomba Logo engraved in them. Give me an idea of the size and what price you'd be willing to spend. I invision them being billet aluminum about 3 inches by 6 or 8 inches. Chromed or electric polished (ie like the board racks finish) Let me know......................


Aqua

---

Aqua, I'm a little interested. If you get a decent amount of people interested, let me know on cost. Although it seems like I remember the Supra ones having some plastic or rubber on them as well. Otherwise wouldn't they be super slippery? Also, how would these be fastened, just drill through the fiberglass? Sorry for all the questions!

I would definately be interested as well, but as mentioned by Aqua, I'd like to have some rubber incorporated, possibly like where the Moomba logo is cut out have the rubber come up through the aluminium. I'm not sure what I'd pay, please give a price range :)

I've been looking for some as well. If you can get them with the Moomba logo for less than $100 count me in.

Quote:

---

Originally Posted by Razzman

I bought a bulk piece of 3mm thick Seadek and cut 40+" long strips 2.75" wide and stuck them on the tops of the gunnels. It actually matches the Moomba platinum exactly. Goes from the tower legs to the gas fill or thereabouts. NO feet can touch the 'glass at all and it looks killer. :D

---

razz,

Could you post some pics please?

Thanks,

Al

Quote:

---

Originally Posted by pickle311

I've been looking for some as well. If you can get them with the Moomba logo for less than $100 count me in.

---

I would, as well.

I would like to see it with a rubber insert as well. If this can be done, count me in.

Quote:

---

Originally Posted by cab13367

razz,

Could you post some pics please?

Thanks,

Al

---

Al, i don't have any of it at the moment but i can have some this weekend as i have to pull the boat out and finally install my stainless thru-hull fittings! :)

Al, here's a couple of pics i snapped today. I couldn't resist and just had to get the back thru-hull fittings in. I'll get a couple better ones in actual daylight to show color comparison. :D

I like it. Where did you get the material to do the job.
Tazz

I got it from Seadek. I bought the 74" sheet because i also wanted enough to place a pad on the nose for a dock step-off and other stuff. Turns out i could have got away with the 38" sheet anyway! I used the 3mm but they also offer it in 5mm as well. I know in the pic it's hard to tell due to the yellow cast but it's the cool gray.

Here's the link to it in the online store. Seadek Sheet Material

Hey I'm in on the steps as well.

Aqua, looks like easy 6 or 7 right now without even trying.

Razzman--
I just went to the seadek website. They can custom make that piece. I am going to give them a call and see if they can make one with the moomba name on it. Great Idea thanks for the info. Hopefully, I ease up on the people that love to slide their icechest across the gunrail.
Tazz

Cool, glad to be of help.

For $100 with rubber, count me in.

I've got them on my Supra, and they are pretty cool.


Dave

Dave A,

got any close up pics?

this is something I wanted but couldn't get much help from the dealer they actually said "well you could put the supra one on" riiiiggghhhhttttt I'll pass on that

I'll take some pics and see if I can post them.


Dave

did anything ever come of this? i would really like some custom step plates as well!

I don't think so but I know I'd still be interested! This is the area that is most scratched up on our boat.

I'm in if someone can locate them

There are no step plates specifically for Moomba, they don't exist. You have four options;

1. Put Seadek on top of the gunwale, similar to this or mine
2. Put a generic step plate there instead, more
3. Use another boat mfgrs step plates, ie: Supra
4. Have one custom machined with rubber inserts

I researched this until my eyes wouldn't focus any longer :rolleyes: