I am a new Moomba Mojo owner.. looking for some tips on where to stow stuff and also cooler ideas.. where to stow on the boat! Help a sister out!!
Printable View
I am a new Moomba Mojo owner.. looking for some tips on where to stow stuff and also cooler ideas.. where to stow on the boat! Help a sister out!!
This is what I did on my ‘17 mojo. 3/4” hdpe cut to length to sit on top of the docking light housing and then 1 stainless screw in each edge, as you can see in these photos. Bomber strong and really made good use of that space
https://uploads.tapatalk-cdn.com/202...f666b3273a.jpg
https://uploads.tapatalk-cdn.com/202...8bfaa6b9aa.jpg
Sent from my iPhone using Tapatalk
This is genius. Good job and.......I'm stealing it
This great. I don’t have docking lights. Could this still be done? I’ve never thought of this, until this post so haven’t paid attention to the space.
Great use of the space.
You could just spend a bit more time and create a bit more shape in the front of the shelf, where it contacts the carpeted inside of the bow hull. It could definitely be done without having to sit on the docking lights.
Sent from my iPhone using Tapatalk
I had NO CLUE that Mojo's opened at the bow seat! Shit, does my Craz?!
I am totally doing this too. I hated the waste of space up there with the ballast sack. This is absolutely perfect!
That is fantastic! Love it! I will do that! Any genius ideas for coolers?? I am looking for that as well! thanks again!
Rocking the Yeti M30 bag this year. Have been using a small hard cooler or relying on the cool/glove box from my old I/O. I found out quickly that having to move seats to get a cold one is annoying for the person sitting in the seat.
The M30 fits behind the drivers seat since I don't have a backrest on that bench like others. I could also throw something under the filler cushion and it would be out of the way.
We just use a cooler bag under the filler cushion. Nobody likes using the bow as bench seating anyway. Alternately, we slip it under the cockpit by the driver's seat. Lots of space there.
I’ve had a piece of hdpe sitting around for years planning this project. Thanks for the inspiration! I cut it to fithttps://uploads.tapatalk-cdn.com/202...6dca120027.jpg
AO soft cooler that you can order with the boat fits perfectly under the bow filler cushion. We use that cooler bag for lunch and food items with the soft freezer packs that comes in hello fresh food delivery boxes. That doesn’t last more than a few trips and then have to be replaced, but they are great at keeping food cool and out of the wet drinks yeti 50 we keep in the cabin (centered in the cabin, just sitting on the floor- convenient access for everyone and doubles as a table).
Sent from my iPhone using Tapatalk
As I am planning to buy an AO soft cooler for drinks to sit behind the drivers seat are you suggesting that they do not last more than a few trips out before they are garbage and need to be replaced? If so I am going to have to look at other options but I was under the impression that they were a solid option but not if they are essentially disposable and only last a few (3-5) trips out
AO soft sided coolers are awesome and last years. Have no fear.
I think the previous post was talking about reusing some cold packs from internet food delivery services.
I prefer the AO soft sided cooler versus the hard sided cooler that both come with the Supras.
Sent from my iPhone using Tapatalk
Yes, this. Sorry, i wasn’t clear. The freezer bags that we use only last a few trips. The AO coolers are amazing and last forever. We sold our ‘17 mojo pro and reluctantly let go of the AO cooler bag that came with it. Bought another AO for the new boat before we received the new boat.
Sent from my iPhone using Tapatalk
Larry & Highrider, Ok phew I don't want to have to hunt for another option as I want to try and avoid the hard side with the Mondo. Thank you for the feedback AO it is!