Printable View
Just got the Mojo out for the first run of the year and I noticed that the throttle is considerably stiffer going from drive to neutral than it was when I put it away. Anyone experienced this? I am assuming it is the cable linkage and it may need to be lubricated
Sent from my iPhone using Tapatalk
I wonder if there is an adjustment that can be made. I test drove a max with a throttle that was so loose it would drop down a bit after hitting a bump and the boat would accelerate if the cruise was not on.
Mondo throttle tension adjustment
https://r.tapatalk.com/shareLink/top...ink_source=app
Adjustment method....
Sent from my iPhone using Tapatalk
Kent, is the thruster option on your boat “fly by wire” or cable?
Great question, I haven’t dug into it.Quote:
Originally Posted by 2in2out
My guess is the thruster is hardwired and throttle is still cable driven.
Sent from my iPhone using Tapatalk
That was my assumption as well given the ergos it operates under.
It’s not the throttle itself that’s stiff and I’m pretty sure the throttle drive by wire and doesn’t have an actual cable. It’s the shift from drive to neutral and neutral to reverse that is stiff all off the sudden and I think that is still a cable linkage. Once in gear it’s smooth as it has always been.
Sent from my iPhone using Tapatalk
Remove the cable from the transmission and see if the stiffness goes away.
So you can tell everyone now, your boat has a stiffy.:rolleyes:
Sorry, I just could not help it. Hope you can work it out.
So apparently when I winterized it I ran the exhaust cooling hose OVER the shift linkage. Moving it under the shift linkage made the throttle butter smooth again.
Sent from my iPhone using Tapatalk
Come on man! [emoji1787]Quote:
Originally Posted by rdlangston13
Sent from my iPhone using Tapatalk