New Craz Order- a few questions

Hi All,

We are about to put in an order for a new Craz, and there are a couple of items we were not sure about. We are coming from a 2008 Crownline (and a 78 jet boat before that), so a lot of the wakeboard boat features are new to us. Any insight would be greatly appreciated.

We will be on a river that usually is a slow current, but can be a little swift at times. I've read that the traditional paddle may be more reliable when dealing with a current. Throw in the fact the cove we do our water sports in requires a lot of turning (still a decent current in the cove), which we were told the zero off would handle better. Any thoughts on which cruise control system would be better?

The boat will be garage kept and towed about a mile from the garage to where it launched. The only time the boat will be towed further than that is for service. Is the $1000 cover that you can order worth the money vs a $250 one I can get on Amazon?

Which prop is best? We will not just be surfing. We ski, kneeboard, wakeboard, tube and the little kids have a Zup board they are learning to ride.

Flow 3 vs. 2.0. I assume we want the latest and greatest technology for surfing, right?

Get 3.0 for surfing


Sent from my iPad using Tapatalk

From what I've heard from several owners is the 3.0 makes a real difference if you ride goofy as the extra tab introduces yaw and cleans up the wave.

If you ride regular the difference is negligible.

On the flip side, I think G6 may only be available with 3.0 now [emoji2375], you definitely want G6 to cut ballast fill times in half.

Sent from my Note 9 using Tapatalk

I'd have Flow 3.0 if I could! My quick impression of it was that it was harder is get wrong. Also, since it "crabs" the boat, instead of lists, you should be running more even ballast, which means MORE ballast!

You're right about the seed control - sounds like Zero Off (padddlewheel) control is best for you.

My personal opinion on the cover is that
1) you really only get one chance to order it with the boat - It will be more expensive after the fact
2) Resale. Even if you never use it, having that cover brand new in the package would be a sweet deal for someone, someday! As trivial as it may sound to you now, NOT having a cover could definitely drive a buyer away!

I actually know of a guy who ordered a new boat and ordered a full set of replacement seat skins to go along with it so he could do a complete interior refresh before selling it! That's a little psyco, but I've considered ordering a second cover with my next boat to keep one stored away for resale and/or a rainy day! Same with the Bimini top fabric.

Just for resale in the future I would order G6, Flow 3, and the Cover.

Props - skiing and surfing are at each end of the spectrum. Hard to get 1 prop that does both great, thus SC has the one labeled 'general use'. Someone on here might have the more aggressive prop and can tell you about rpms and ski speeds.

order cover with boat even if you don't use it. it's something most expect to get when buying used and when you are ready to sell the boat you won't want to buy a cover just to sell and it'll make your boat that much more desirable in the future. you never know when life will change and you want a cover for a day/week/month.
you can get covers just as nice or nicer aftermarket for similar monies but I'd order with boat. yours garage kept and towed a mile, you will likely never use the cover except to drop off to dealer for work. we garage keep and tow 15 miles to the lake. current boat hasn't seen the cover since it was dropped off to us new. think it's in the attic...


we used to ride the fox river in green bay. it had a steady current. our gps held different speeds when going up and down stream. for us, we learned to run one speed down and .6mph different going up. it was an easy transition. whichever one you end up with, you will adapt to. there's pros and cons to both.
we found the surf wake to be different when going up and down as well. I don't board so not sure if it would be different.

Paddle wheel for sure on a river. Takes away all the guess work.

Flo 3.0 for sure. Make a better wave...period.

G6 ballast for sure. It doesn’t cut your fill time in half, maybe a third but still cuts it down. That’s always a good thing.

I ordered the standard prop, added 1,700 lbs of ballast and am now spending a chunk of money for the heavy load prop. Get the surf prop. I can almost guarantee that you will surf more and more and ski less and less. I also own a record capable ski boat and I skied only one time last summer, surfed a 100 times. You will almost certainly be looking at adding additional ballast in the future and you will appreciate the surf prop.

Order every option that is related to the wave/wake on your boat. The wake/wave performance is the primary reason you’re upgrading from a stern drive so don’t leave anything out that you might regret down the road. No one was ordering Flo3.0 when I built my boat so I went with 2.0 and I am regretting that decision now.

Just get the cover. You will need it when you get it serviced, take it on vacation, resale etc.

Congratulations on your first wake boat. It will bring you years of family fun. Great choice purchasing from Skiers Choice. Welcome to the family.

I would suggest an aftermarket cover from commercial sewing like the Supras use.


Sent from my iPhone using Tapatalk

Thanks everybody for the responses!

Quote:

---

Originally Posted by got2skigrl

Thanks everybody for the responses!

---

Don't forget the heaters and AutoWake, those make everyone happy.. :)

I love spending other people’s money.....lol


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by parrothd

Don't forget the heaters and AutoWake, those make everyone happy.. :)

---

No heaters for us. We are pretty much only out May-September, which is warm enough in the South. Now, if they offered A/C, that would be a different story :cool:

You can get mist coolers for your boat.

MaliBU has it as an option, but aftermarket kits are $500


Sent from my iPhone using Tapatalk

Hello and Welcome!!

I just picked up a '20 Mojo this year and traded up from our '12 LSV.... You will love it!

Going from an I/O to and inboard was a BIG learning curve for me when I first got the LSV.... I had a 23ft Rinker Captiva prior and actually downsized alot going to the LSV but learning how to drive the inboard was definitely something that took me by surprise! I had no idea it was going to be that different... especially reversing and docking.

G6 is a must with how much ballast these new boats require.

Flow 2.0 is what was on mine and it works fine... but if building I would have went 3.0

Never had an issue with paddle wheel this summer on my Mojo, but I did have a few issues with the LSV's paddle wheel in shallow water and really bad in rough water keeping speed accurate. It would cause the boat to surge or cut power intermittently which caused the wave to disappear when surfing.... So far thought the Mojo hasn't experienced either issue.

I would definitely opt for the factory cover in your case..... I keep my mojo in the garage all the time and trailer to and from like you..... If I leave the boat uncovered for much more than a week at a time there tends to form a ton of "dust" and just crap that settles out of the air....this tends to get in between all the seats and down in the crevasses in the boat and then when any water runs to those areas it turns disgusting..... Keeping the cover on it even when in the garage pretty much eliminates this issue. I also never tow the boat in rain without the cover.... I have no idea how people are able to do this and keep their sanity..... I would go crazy trying to tow my boat uncovered in the middle of a rain storm with semis and other cars kicking up debris and nasty road water inside my boat!!!! You never know when a opportunity may come up where you will trailer somewhere new or vacation somewhere different than your normal that requires towing a further distance. Wouldn't want to not have a cover as an option.

Also as mentioned I think resale you will have much better luck selling with a cover....although it seems trivial you'd be surprised how many people may pass on buying for that reason alone..... Me being one of them!

Only way I would have not gone with a cover at order would be the fact that they don't make the black covers as an option any more.... My LSV had a black factory cover and it was FARRR better looking than the grey. I would have considered opting out of factory cover and going with an aftermarket Evolution or other quality cover in a black. My boat was ordered by the dealer and I got a heck of a deal so I bought it as optioned rather than custom ordering.

https://i.vgy.me/daaoPR.jpg
https://i.vgy.me/8SD0PC.jpg
https://i.vgy.me/ePPN93.jpg

Old LSV with the black cover

https://i.vgy.me/nBVXdP.jpg

-Tyler

More of the Black Cover on the LSV:

https://i.vgy.me/Nw6bNL.jpg
https://i.vgy.me/18RSsB.jpg

-Tyler

Quote:

---

Originally Posted by RC_Hinojosa

From what I've heard from several owners is the 3.0 makes a real difference if you ride goofy as the extra tab introduces yaw and cleans up the wave.

If you ride regular the difference is negligible.

On the flip side, I think G6 may only be available with 3.0 now [emoji2375], you definitely want G6 to cut ballast fill times in half.

Sent from my Note 9 using Tapatalk

---

Yep...Some of the latest model Moombas only offer G6 in conjunction with Flow 3 (Makai for instance), but most still offer Flow 2 and G6 without paying the $1300 for F3