please share your best setup for a moomba max ballast/lead
Printable View
please share your best setup for a moomba max ballast/lead
RyanE, I replied on your other thread but just in case you miss it we have a 2020max with 4,000lbs water ballast and 1,500 lbs of lead. 400 lbs of lead in the nose, and 1,100lbs of lead midship. We run the wake plate around 0-20 and surf plates 60-70 depending on people in the boat that day.
Sent from my iPhone using Tapatalk
Awesome thank you for the advise. Always good to have reference.Quote:
Originally Posted by Bmac
nice setup looks amazing
Can you go into more detail about where you have everything? If I'm reading this you have 7000 pounds of ballast before passengers in fuel. What prop are you using ?can you even achieve 10 miles an hour with much weight?Quote:
Originally Posted by Bmac
Engine rpm? Thanks!
I think he is saying he has 5,500 lbs of total ballast (water and lead). He’s just describing where he has weight placed. I don’t think you’d even be able to pull 7k lbs lol.
FlienlowQuote:
Originally Posted by flienlow
Hak is correct. I have 5,500 lbs total. I was just describing how I’ve dispersed the weight. I saw a huge difference in the size and push of the wake once I hit 5,500 lbs. I usually run right around 3800-4000 on rpms. I can’t remember which prop I have but I am about 4600 above sea level with the 400 motor. I run 10.8-11.2 mph when surfing. Burn 8-9 gallons an hour while surfing.
Sent from my iPhone using Tapatalk
Bmac,
How does the 400 perform at your altitude? We boat between 4500-6500, an are considering buying a Makai. My wife doesn’t see the need for the 450 and prop upgrade. I have no dealers near me (if 4-5 hrs away is really near) me at a similar altitude.
Have you gone to any higher elevation waters, and if so, what elevation is the performance break over?
If you remember which prop you have let us know. We have the standard surf/wake prop and we are at 4600/4700 feet here and are wondering if the high altitude prop would help. When weighted down we can barely hit 10.8 mph
2in2out and Fern
I just checked and I have the Nibral OJ 15.5x15. It is a prop for altitude that my dealer set me up with. The highest I have been is 5,600 feet above sea level and the 400 does fine. Surfing on the port side I have a harder time getting up to speed. The only time I wish I had the 450 is when we have a crew of 15 or so. Doesn’t happen a lot but I have had to use my wake plate at 50 to get to surf speed when we had 17 of us. 6 adults and 11 kids. If you get the Makai at that altitude I would go with a 450 for sure. Especially because I would throw a lot more weight at it! [emoji12]
Sent from my iPhone using Tapatalk
If you’re gonna wakeboard heavy, the 400 will struggle. Surfing should allow the 400 to hang in there.
Sent from my iPhone using Tapatalk
You'll can pull 7k with the right prop. No prob......
I guess I didn’t think to talk about wakeboarding because due to injury I’m unable to do much wakeboarding anymore. I did pull a wakeboarder once and I filled the front bag 100% and didn’t put any in the back and still hard a hard time getting the right pitch according to auto wake. I was kind of shocked to be honest but I haven’t spent enough time testing it out. With the weight I have I know that I can’t get on plane with more than 60% in my bags. I really wish all three plates would deploy when you take off. My brothers Centurion has all 3 plates deploy and it makes a huge difference. Just my $0.2.
Sent from my iPhone using Tapatalk