I have not been too active on here lately.
The 2013 Supra SA450 has moved onto a new home. New owner is about five hours south of me, so am doubtful will them on the water.
Onto the next boat!
Attachment 28156
Printable View
I have not been too active on here lately.
The 2013 Supra SA450 has moved onto a new home. New owner is about five hours south of me, so am doubtful will them on the water.
Onto the next boat!
Attachment 28156
Congrats on the sell! What’s your plans for the next boat?!
Sent from my iPhone using Tapatalk
Should be signing final paperwork on Keenan Flegel's boat Saturday.Quote:
Originally Posted by moombacraze
congrats... centurion?
Yes, 2017 Ri237Quote:
Originally Posted by sandm
What's next?
Sent from my Note9 using Tapatalk
See above...Quote:
Originally Posted by RC_Hinojosa
Niiiice! Wave machineQuote:
Originally Posted by sivs1
Sent from my iPhone using Tapatalk
CongratsQuote:
Originally Posted by sivs1
Sent from my Note9 using Tapatalk
The RI237 is a beautiful boat. Heavily considered one.
Sent from my iPhone using Tapatalk
Same here... super close to signed for one. Great boat and wave. Just no support in Houston!
Congrats! Enjoy and show us that wave!
Local centurion dealer is a shit show.
That and I just liked the SA better. Centurions are very rare around here, and the local dealer sat on 2 17’s all last year and still has a heavily discounted 17 demo with 135hours for $89k
Sent from my iPhone using Tapatalk
We are very fortunate here in Utah with dealer support. Marine Products is one of the most awarded and top rated Supra/Moomba dealer in the country. The local Centurion dealer is their largest and most awarded dealer. If it wasn't for that I would be getting Keenan's boat.Quote:
Originally Posted by larry_arizona
Hopefully you get Keenan’s surf skills too!
Sent from my iPhone using Tapatalk
Seems like a lot of the powerhouses are out west. Galey’s, AWS, MP, etcQuote:
Originally Posted by sivs1
Sent from my iPhone using Tapatalk
Did you look at the Fi?Quote:
Originally Posted by sivs1
Does it have the new exhaust and does that solve the hydro-locking issues they had?
Do post some pics when you get that rig rolling.
Sent from my P00I using Tapatalk
Yeah what was it...the Stinger plate allowed a bunch of water to flow into the motor when the boat was at full ballast or something?Quote:
Originally Posted by MJHSupra
Sent from my iPhone using Tapatalk
The fit and finish between an Ri and Fi is night and day.
The Fi is no bueno.
Ri beautiful, Fi embarrassing
Sent from my iPhone using Tapatalk
Congrats on the new ride
I'm surprised you felt that way about the Fi. We demoed the Fi and felt it was great, it was loaded so maybe the one you saw was bare bones. I do agree the Ri is an amazing boat and can't wait to get on the water with ours. When I talked to Keenan he was sad to see it go. We have week long trip in April planned with it so I will be sure to post up some pictures for you.Quote:
Originally Posted by larry_arizona
I come from the automotive engineering field and the Fi 23 I sat in at the 2018 boat show was simply terrible with fit and finish.Quote:
Originally Posted by sivs1
The gaps and trim fitment was embarrassing and I sat with one of the Centurion VP’s in the boat and pointed out every “rat hole” on the dash and interior.
Rat holes is an industry term for a bad gap between trim pieces big enough for a rat to fit through.
I used to have pics of them, let me see if I can find them.
He understood and took note, maybe the 19’s are improved??
Sent from my iPhone using Tapatalk
I think its a really nice looking boat that has a killer surf wave. I would be very concerned with the hydrolock problem however. Make sure that problem is taken care of because that could be a big deal.
Amazingly I saw the same rat holes. The dash almost looked homemade to me. Like a kit car done in a garage.Quote:
Originally Posted by larry_arizona
Haven’t pored over an Ri. Assume it’s a lot better.
Sent from my iPhone using Tapatalk
I was not looking to bash the boat on that hydrolock issue, but looking to know if that new exhaust fixed or helped the issue. I recall reading some pissed-off owners on that forum. I have not been on that forum for a long time.
The Fi and Ri looked nice to me at the boat show. Hoping to catch a ride on that big 25 this summer. Too big for me to want to own, but the 23' is the perfect size.
"Hopefully you get Keenan’s surf skills too!"
I once spent the day surfing with Keenan and his brother Noah. They surprised the hell out of me by both of them getting on one board - while going 10 mph and then Keenan got on Noah shoulders and they continued around the lake.
This was captured by PBS as a TV documentary called "Boards on the Water".
I've been in a couple of centurions and my opinion was the same as posted above. one of if not the best surf waves ever WHEN DIALED with some very nice proprietary wave technology and best factory ballast in the industry but I could not get past the fit/finish of the dash and interior pieces/parts.
no dealers here locally and haven't been to a boat show since '17 so my experience was from '13-'17. hope they have improved.
at the end of the day doesn't matter what all of us say if you like it enjoy. I'd love to ride that wave.....
Quote:
Originally Posted by MJHSupra
My understanding is that because the hull is SOOO deep and there's limitations on driveline angle, that the engine sits REALLY low comparted to the waterline when the boat is slammed. If you look into the engine compartment, you'll see how low the engine is relative to what we're more used to seeing on wake boats.Quote:
Originally Posted by Matt0520
The "solutions" are fairly straightforward but they're work arounds for sure. 1) If you're going to shut off the engine, empty the ram-fill ballast first. 2) leave the engine running while the boat is slammed.
Basically at rest, the engine on a fully ballasted boat is so low that the exhaust risers are below the water line and when the engine's not running, the water can go from the exhaust outlet up and over the risers and into the block. Yes, it has a flapper, but that doesn't seal watertight so it could slow the backflow but not eliminate it.
And your right about where the engine sits. These boats require deeper water for sure. The draft on them is 36" on the bigger models. Even the MXZ 24' is 27" of draft.
In all fairness, the Fi is an entry level boat for Centurion and the Ri is high end.
Ri is much nicer than Fi as it should for the price delta.
Some might really not care about the interior fit and finish as long as the wave is good.
I will say Centurion offered to fly the wife and I to California to tour their factory on their dime.
Really nice offer, but picked the Supra.
Sent from my iPhone using Tapatalk
Most of the time, if they have to buy your business, it’s not worth it.Quote:
Originally Posted by larry_arizona
Sent from my iPhone using Tapatalk
I agree, and we didn’t go.Quote:
Originally Posted by padge
Sent from my iPhone using Tapatalk
Supra would be my choiceQuote:
Originally Posted by larry_arizona
Sent from my iPhone using Tapatalk
Thanks! I do recall reading that on their forum.Quote:
Originally Posted by trayson
Sent from my iPhone using Tapatalk
The entry level moniker is misleading with regard to price. Easily over 100 in a heartbeat on the 23 and the 25 at Polar Bear apparently had an MSRP of 180??!!Quote:
Originally Posted by larry_arizona
They will tell you it’s an ala carte boat where you can choose the options you want. Trouble is choosing any of them makes it expensive.
Sent from my iPhone using Tapatalk
I saw that. 180 is Supra se territoryQuote:
Originally Posted by dakota4ce
Sent from my iPhone using Tapatalk
Wow interesting. Makes me like the factory surf pipe with the tall bend design. I assume that’s by design to keep water flowing one way only.Quote:
Originally Posted by trayson
Sent from my iPhone using Tapatalk
180k for an Fi25??
What does an Ri237 MSRP for? $200+?
Sent from my iPhone using Tapatalk
This one is used and 4 sale locally...
https://www.onlyinboards.com/Pro-Ath...xas-89694.aspx
This one is yellow, which is not helping it sell...I would assume.
https://www.onlyinboards.com/2018-Ce...uri-92229.aspx
https://www.onlyinboards.com/2019-Ce...uri-89298.aspx
Damn, over $200k MSRP
Doesn’t even have the LSA supercharged engine option.
Sent from my iPhone using Tapatalk
those prices are INSANE for a centurion.