Printable View
I have a 2014 Mondo and I'm trying to install a Nautic Laugic GPS unit. Where the paddlewheel connector is supposed to be, my wires appear to be spliced.
Anyone with a 2014 Mondo, is this how yours are, or do you have a connector? If they're all like this, then I must be looking in the wrong place for the connector. https://uploads.tapatalk-cdn.com/201...9021145876.jpg
Naw, they just shrink wrapped the connector, if it gets water logged the speedo goes crazy. You probably want the other end so you can mount the GPS Puck near the dash?Quote:
Originally Posted by Shoebox
That is not a shrink wrapped connector. It's too small. It should be roughly the size of the gray one shown there.
Here are the male and female connectors of the GPS unit. https://uploads.tapatalk-cdn.com/201...660801f1dd.jpg
It looks like the cable was cut and butt spliced back together.
Sent from my SM-G930V using Tapatalk
That's what I'm thinking, but I want to make sure before I cut it out and put in connectors.Quote:
Originally Posted by jstenger
I installed this on my 14 Mondo. The only thing the paddle wheel is used for is water temp. It is the brown and white wire. Attachment 26596Attachment 26597
This is the gps unit connector. Attachment 26598
Thanks for that. That is a completely different connector.Quote:
Originally Posted by JD14Mondo
Can you see the Deutsch connector number? ThanksQuote:
Originally Posted by JD14Mondo
This is the connector. Attachment 26599
This is the kit I installed. Everything matched perfectly. Attachment 26600
Perfect. Thank you.
That connector in post #3 looks to be a Packer weather seal, not a deutsch.Quote:
Originally Posted by Shoebox
It's a Delphi connector. It's the wrong GPS unit, for a 2015-2016 Moomba/Supra.