Tower Stand/Support Pictures

I just purchased a 2008 Mobius LSV. I had to drop the tower to get it into storage. I'm not real comfortable with how it is sitting right now. It's basically sitting on the back seat. I see that people have made supports, but I would really like to see some pictures. Does anyone have any they can post of how they support their tower when folded?

Also, along the same lines, using these stands/supports, are people able to put their covers on? Right now, I've just got it draped over everything. Not ideal.

Thanks in advance!

Quote:

---

Originally Posted by boarder3304

I just purchased a 2008 Mobius LSV. I had to drop the tower to get it into storage. I'm not real comfortable with how it is sitting right now. It's basically sitting on the back seat. I see that people have made supports, but I would really like to see some pictures. Does anyone have any they can post of how they support their tower when folded?

Also, along the same lines, using these stands/supports, are people able to put their covers on? Right now, I've just got it draped over everything. Not ideal.

Thanks in advance!

---

On mine it would rest on the wake board racks against the main rear tower support.

I dont have a picture handy but i think a simple and solid method would be get a 1ft square 1/4inch plywood board. Then a 2x4 and mount it standing up. Then notch out the top to a U to hold the tower. Use 1 or 2 stands depending on how comfortable you are.

I will get a picture posted of my tower support that the previous owner made. Give me a day and I will get it posted.

Quote:

---

Originally Posted by mmandley

On mine it would rest on the wake board racks against the main rear tower support.

.

---

same here, or a 2x4 with a cutout in the shape of a beer can was a super simple way.

Quote:

---

Originally Posted by moombadaze

a cutout in the shape of a beer can

---

hmmmmmmm . . . . .

how in the world did you come up with that idea?!?!?!?

beer induced thinking I think

Quote:

---

Originally Posted by moombadaze

same here, or a 2x4 with a cutout in the shape of a beer can was a super simple way.

---

probably overkill but used 2 2x4 space about 6" apart with spacer blocks all nailed together, with a notched end for the tower bars.

I use a pair of old towels wedged between the wakeboard racks and the lower tower support. Works great, padded spot to rest on.

Great minds think alike! I do the same as kaneboats

So these are not the greatest pictures but it is basically a 4x4 that runs the width of the boat with a short 4x4 attached on top of the end foot or so that support the "legs" of the tower. Hope that makes sense.

These are perfect. Thanks for the pics!