Looking for height ASAP Please!

Printable View

03-26-2013, 01:57 PM
alex56

Looking for height ASAP Please!

Can someone give me the height of a 2008 mobius lsv with the standard tower folded at the point of the highest knuckle please! I'm no where near my boat or else I'd measure to determine my door height

As much as I hate to say it I'm going to sell the mobius for a new centurion sv230 or a sv211 in the next week depending on how tall my garage door is. Man was the mobius a great first boat to own !!!! Each centurion requires a different height. Can't remember if my door is 7 or 8 feet, gotta make sure it fits nothin like a 80k mistake LOL

Thanks guys !!!
03-26-2013, 02:00 PM
chawk610

with an 8" drop hitch mine clears a 7 foot door by 1/2". Oh, and I have an LS.
03-26-2013, 02:03 PM
mmandley

Quote:

Originally Posted by alex56

Can someone give me the height of a 2008 mobius lsv with the standard tower folded at the point of the highest knuckle please! I'm no where near my boat or else I'd measure to determine my door height

As much as I hate to say it I'm going to sell the mobius for a new centurion sv230 or a sv211 in the next week depending on how tall my garage door is. Man was the mobius a great first boat to own !!!! Each centurion requires a different height. Can't remember if my door is 7 or 8 feet, gotta make sure it fits nothin like a 80k mistake LOL

Thanks guys !!!

With an 80K boat the dealer should let you tow it home and test fit the garage.

LSV have always been advertised as fitting a standard 7 foot door. Some people have to do weird things to get it to fit but i think this depends on if your driveway is level or tilted.
03-26-2013, 02:07 PM
kaneboats

My 2008 LSV on a single axle trailer would go through my 7 foot door which wasn't quite 7 feet but I had to unhitch and lower it all the way down on the trailer jack and push it in by hand.
03-26-2013, 02:14 PM
alex56

Thanks guys ! I should have mentioned the measurement of the boat off the car and the wheel all the way down. We have to push it in. It's just really confusing because everyone gives a different answer ! But I really appreciate it !!
03-26-2013, 02:15 PM
wolfeman131

Quote:

Originally Posted by alex56

a new centurion sv230 or a sv211

nothin like a 80k mistake LOL

If you're that high on either of those boats, then you're about to make a mistake. I was quoted in that neighborhood for a fully loaded Enzo SV233 which included shipping to Atlanta. I'd ask the dealer to sharpen the pencil a bit more.
03-26-2013, 02:18 PM
alex56

Quote:

Originally Posted by mmandley

With an 80K boat the dealer should let you tow it home and test fit the garage.

LSV have always been advertised as fitting a standard 7 foot door. Some people have to do weird things to get it to fit but i think this depends on if your driveway is level or tilted.

Yeah I wish LOL too bad either you have to custom order one or just find a new one floating around a dealer and my dealer doesn't stock them you have to order
03-26-2013, 02:23 PM
mmandley

Quote:

Originally Posted by alex56

Yeah I wish LOL too bad either you have to custom order one or just find a new one floating around a dealer and my dealer doesn't stock them you have to order

The other option is your dealer should know the height with the tower folded of the new boat. if they don't they can call around. We have several of them sitting at the dealers in Cali and Oregon.

Cal Marine in Cali is a great place to call if you need measurements.
03-26-2013, 02:29 PM
alex56

Quote:

Originally Posted by wolfeman131

If you're that high on either of those boats, then you're about to make a mistake. I was quoted in that neighborhood for a fully loaded Enzo SV233 which included shipping to Atlanta. I'd ask the dealer to sharpen the pencil a bit more.

My dealer is Jeff page the owner of inland surf boats and inland surfer I think hee's beyond sharp in this area of expertise LOL those babies are not cheap anywhere you get em
03-26-2013, 02:32 PM
alex56

Quote:

Originally Posted by mmandley

The other option is your dealer should know the height with the tower folded of the new boat. if they don't they can call around. We have several of them sitting at the dealers in Cali and Oregon.

Cal Marine in Cali is a great place to call if you need measurements.

I know how tall both Enzo models are already I'm trying to get an idea of what my door height is now with my mobius so I will know which one will fit LOL but thanks for the suggestion man !
03-26-2013, 02:38 PM
wolfeman131

I know Jeff. Talked with him numerous times at surf events last season. I like him very much and all that he does for the sport. I own 1/2 dz Inland Surfer boards.

None of that means squat in regards to what he wants for the boat. But, what do I know?

http://onlyinboards.com/Details.aspx?ID=36763
03-26-2013, 03:28 PM
alex56

Quote:

Originally Posted by wolfeman131

I know Jeff. Talked with him numerous times at surf events last season. I like him very much and all that he does for the sport. I own 1/2 dz Inland Surfer boards.

None of that means squat in regards to what he wants for the boat. But, what do I know?

http://onlyinboards.com/Details.aspx?ID=36763

Yeah he is a great guy and is very helpful! Their boards are the only ones I ride! I'm lucky where I live almost every major watersport company headquarters is only about a 45 min drive from my house, its great!

That 211 is great but its got 45 hours and that black doesn't look good in salt water LOL

This is what were getting, don't know what size yet, but same color, loaded and with the 450 engine another reason why its so pricey

http://www.tkwatersports.com/watersp...zo%20SV230.JPG