Printable View
So I started surfing last year. I can't get the wave dialed in nor can I let go of the rope. Looking for someone who can help me dial it in on a moomba... I have an 07 Outback V and I upgraded the rear bags to 750's HELP =)
Free pulls to those that can help
I had an '08 and set it up with a 750 on whatever side we were surfing, all passengers on that same side from bow to stern, mph 9.8-10.5 and wake plate 3/4 to all the way up. Start, there and hold the rope as you learn to stay in the pocket.
Full 750 in the locker, full ski locker sac (usually 400), plate all the way up, everyone on the surfside, start at 10 mph, and back off slowly until you hear a real throaty sound, that is when the clearance between the swim platform and prop/exhaust is ideal and throws the best wave. Hope any of that helps.
Oh, good call! I forgot that center has to be full!
And if you can't get it after that, me & dub will fly out there. But, you gotta buy the beer!
Dubwake21 likes this
I will be in Paradise in a couple weeks with the Wake9 crew getting Claudia surflessons from the pros. It would be no trouble to roll down another hourish to Sacrac to visit you for a day if you wanted and check out your setup and help you dial it in.Quote:
Originally Posted by SanMarzano
Let me know. Im planning on early to mid June for my trip. It would be a Sun Mon Tuesday deal most likely
On the 07 obv . Brad and I alone in boat so just driver. 750 in he rear , 400 in the locker, 650 ibs in the nose. 3/4 wp up at 10.5 mph.
Me
http://i258.photobucket.com/albums/h...IMAG0371-4.jpg
brad
http://i258.photobucket.com/albums/h...IMAG0372-4.jpg
The key is he surf board on a smaller boat, I can only free ride on the inland surferboards, my broadcast and buddy's cwb ride, I can't free ride on ...
What board are you trying..
I brew beer so I have that coveredQuote:
Originally Posted by wolfeman131
Let me know the dates. If I'm not traveling for work maybe we can work it outQuote:
Originally Posted by mmandley
Sounds like you might need my expertise on dialing that thing in.Quote:
Originally Posted by SanMarzano
im also always willing to sacrifice myself to help with tastingQuote:
Originally Posted by kaneboats
So what you are saying is remove the 750's, replace with kegs of homebrew and install a tap off of the transom?
Actually if you remove the 750, fill with Kegs you will need to run the tap to the BOW and then you wont need bow weight any longer LOL. The only problem is just like the Titanic you will be sinking by the Bow as the Keg empties and the bow fills with Beer Ballast, but you would have momentary minutes of multiple fire hose imitationsQuote:
Originally Posted by SanMarzano