Printable View
i'm doing a heater install and i wanted to buy a switch that sc uses if you get it installed factory. order it from a dealer or over the net?? since i have no current dealer... anyone satisfied with their dealer please give me a name and number to order parts thru.
Call Atlanta Marine & ask for Heidi. She will hook you up.
678-482-6499
http://www.atlantamarine.com/
Mike , parts manager at silver lake, NY just ordered me one for pick up on the 21st.
He could probably send you mine and then replace mine in that couple weeks.
Phone: 585.237.5185
its in western NY
http://www.silverlakemarine.com/incl...0&sys=1&bhcp=1
ok thanks guys
anyone have the schematics for the factory heater switch??Quote:
Originally Posted by gus 08 mobius lsv
I thinking of using this if i can move my fourth ballast switch to the g111 plate like brain rinse did..
Is it the same as the ballast switch?
Thanks
Joe,Quote:
Originally Posted by jmvotto
See post #16 on this thread:
https://forum.moomba.com/showthread....+switch+wiring
Might help you with GI light switch issue as well.
Al
Al, Thanks i was looking for that thread last night and forgot wher it was. I wsh we had like a favorite tab on this site....:D
Al, the heater switch i have is different than the ballast. I did a test and found the flowwing for those that have one on my bench.
looking at the back of the switch( sorry i suck at ms paint brush) 1 to 4 right /left column
Position 1 right column negative
Position 2 left column Low
position 3 left cloumn postive
position 4 left column high
http://i258.photobucket.com/albums/h...o/IMAG0186.jpg
http://i258.photobucket.com/albums/h...o/IMAG0187.jpg
JV - you have a granite topped workbench?!?!?
high class, baby. high class.
^ Ha! I wouldn't recommend using a hammer on that pretty work bench!
Nope, they garage pics did not come out as well so i shot them again in the kitchen:D wife was sleeping so i got away with one...Quote:
Originally Posted by wolfeman131
Joe,
That's interesting because I used the stock GI ballast switch, changed the faceplate out to the heater faceplate, and am using it as a heater switch. So were you able to use the heater switch as a ballast switch?
Al
Never mind - reread your post. Looks like you are using this as a heater switch and was just pointing out that it's different than the ballast switch. Got it.
yep I ordered it directly from SC through the dealer. Now my real decition is to move the g1 to the g1111 location and replace the heater switch in the dash. or just mount the heater craft switch and have all three speed settings.Quote:
Originally Posted by cab13367
:confused:
any pro con input would be great
I'd move the GI switch and use the factory heater switch for a factory look. I hooked up the med and high settings. I don't ever wish I had the low setting and in fact, I don't think we ever use the medium setting. It's on high or it's off.Quote:
Originally Posted by jmvotto