Here's your chance to get a heater at wholesale price. Let me know if you would be interested and how likely you are to order. If you pm me, I will send you the prices and model info?
Need 11 orders to make it a go!!
Printable View
Here's your chance to get a heater at wholesale price. Let me know if you would be interested and how likely you are to order. If you pm me, I will send you the prices and model info?
Need 11 orders to make it a go!!
Whats a "Heatercraft"? I may be interested.
Three outlet heater for the boat.
Gotcha, so nothing to do with keeping engine block warm in the winter. 10-4
A heatercraft is a boat heater - three or four outlet with flexible hosing to get under towels
The units are:
The 314HC(3 outlet) and the 337H4C(4 outlet)
how about a group buy for a/c for those of us in the heat belts
I plan to buy one in the spring.
If the savings are big enough, I dont mind buying one now. :)
I can't find the 337H4C model online to review the specs. I'm looking specifically for the difference between the euro vents and the hot tubes, in both look and functionality. Is the euro vent considered the "fixed vent", and the hot tubes are the "pull out" vents? So you would need to mount the euro vent knowing that it cannot be pulled out to stick under your sweatshirt or towel? Is that how those work?Quote:
Originally Posted by jamie_abb
Maybe he means this one? http://www.heatercraft.com/ProductIn...uctid=317-H4-C
The euro vent is fixed, the hot tubes are pull out. All of them can be mounted wherever you want, assuming you have enough duct/space to put them there. I think usually people put the fixed vent under the dash or drivers seat so the drivers feet get warmed.
I am thinking we need a 4 outlet heater also.
2 for the front, 1 for the back and one euro vent for the driver.
how hard is the install on these? and roughly whats the group price gonna be?
Is there any where else to install the heater other than the bow side of the driver's hump? I'm thinking that is the standard home form them?
I done gone and put a sub enclosure on top of the hump and it protrudes out past the hump where the heater usually sits and lines come out. I don't know if I have enough room there now :(
You guys should move on this if you are thinking at all about a heater. It is one of the most appreciated creature comfort features. It cost me $550 as a factory option when I ordered my 2007 Outback and includes a three-speed fan and three outlets (two w/ hoses and one at helm to keep driver's feet nice and warm). Well worth the money. Make sure you winterize it properly at season end to keep the core and lines form cracking.
I'm on board for the 337h4C 4-port heater. Let me know how to finalize this.
Not too bad. See below.Quote:
Originally Posted by lsvboombox
https://forum.moomba.com/showthread.php?t=10840
Yes, on the front (fore) side of the hump is where the factory normally installs the heater core but you can install it anywhere as long as you can run the heater hose (the flex duct) from the core to where you want to install the vents. The longer the run, the less CFM you'll have at the vents so you want to keep it as short as possible. Also, the heater core takes up a bit of space. The factory installs it where it does because (1) it uses space that is generally unused and (2) it's close to where the hot tubes are installed (in the walkway). Installing the hot tubes there also does not use up valuable storage space.Quote:
Originally Posted by viking
I've seen the core and the hot tubes installed in the storage space under the seat behind the driver's seat but it pretty much took up all the storage space there.
Wife says it's the best addition to the boat. Happy kids and wife = happy boating. I got the 3 'tubes' this past spring. Complete system $550, install by dealer $350. To give you an idea of retail.
FYI, if the hot water run is too long at the footwell, it might not get hot enough for your liking at idle (and in very cold water). You can get a secondary water pump to aleviate this problem.
I've got 10 interested. Can you send me an email if you want to go ahead
[email protected] subject - heater
I'm going to need your given name and address.
Thanks,
Jamie
As a point of reference, I paid $400 plus shipping for the three outlet complete kit including three pull out hot tubes and zero euro vents from go2marine.com earlier this year.Quote:
Originally Posted by jamie_abb
Email sent with questions.
Email came back undelieverable.
Count me in, spoke with Danny on the kit I want... Once you got the ten lt me know....
thx
What is the update...got 10?
I might be interested if someone would give me the info for the discount. I don't want to jump on the band wagon if I'm only saving a few bucks.
I sent a PM yesterday requesting info and have not heard back anything yet.
PM sent - must've missed that oneQuote:
Originally Posted by dusty2221
I spoke to Danny - he has no problem with a few members ordering something other than the two models we mentioned. He would like us all to order on the same day. I'm going to suggest November 15? Your thoughts?
11/15 works for me. Thanks again for arranging this.
would prefer sooner....
Jamie_abb, first of all thanks for trying to pull this together.
Do we call Danny and talk to him to get the price info? In your pm u mentioned 2 models/prices and it appears there are options also. I am in but would a little more info.
i called danny and told him what i wanted.. he gave me the group buy price for selectionsQuote:
Originally Posted by mcdye
Are we not supposed to be sharing the group buy price or something?
PM sent jQuote:
Originally Posted by WaterBullDawg1980
Can I get a PM on the price as well...I might be interested. Thanks
Still no PM.....Anybody, PLEASE.
Thank You LSVBoombox for the PM....I'm interested.
Are there even 10 people interested?Quote:
Originally Posted by Lawdog
i was looking to get a price on 4 heater unit as well. does anyone have the prices. Would want 4 pullout hoses
I am in on the group purchase. Somebody please let me know what I need to do.
Thanks,
Eric
I'm interested. Can someone PM me with price info on both models. Thanks
Sorry if I haven't got back to you sooner with the group buy info. Been too busy motorcycle slacking to get back to my boat slacking.
The plan is to have everyone phone order on Nov 15. Shipping costs are your own.
Thanks guys.
Just spoke with Danny, x224. Got my order in!!
Got the 4 port with 1euro and 3 hot tubes...
Thanks Jamie!!!