Got an 03 mobius that I am doing the reversible ballast upgrade kit for. So now instead of running two hoses to each bag I only have one which leaves an unused hole. How did y'all plug this second hole?
Sent from my SM-G955U using Tapatalk
Printable View
Got an 03 mobius that I am doing the reversible ballast upgrade kit for. So now instead of running two hoses to each bag I only have one which leaves an unused hole. How did y'all plug this second hole?
Sent from my SM-G955U using Tapatalk
Wakemakers should have all the fittings you need for your bags
Ya I called and they had no idea how to plug it which stinks cause I'm putting in an order there soon alreadyQuote:
Originally Posted by KnoxMojo
Sent from my SM-G955U using Tapatalk
Post up a picture of your bag, maybe someone here will have some knowledge for you.
This makes no sense. They have most all fittings. Is your bag a fly high? They make threaded caps for the holesQuote:
Originally Posted by stx.dead.I
Dunno what manufacturer but it's the factory gravity III system bag
Sent from my SM-G955U using Tapatalk
One of these?Quote:
Originally Posted by stx.dead.I
http://barefootinternational.com/FATSACS.bifh
If so:Quote:
Originally Posted by moombahighrider
https://www.wakemakers.com/fly-high-...ting-w731.html
Will snap a pic when I finish my workout in about 20 mins
Sent from my SM-G955U using Tapatalk
Change of plans, I was looking at the bags to snap pics of the fitting and the old bags had caps on some of the fittings already so I stripped them off for the ski locker bag
Sent from my SM-G955U using Tapatalk