Printable View
I'm getting this code repeatedly the last few outings. Everything seems fine. I can "hide" it, but it comes back randomly several times per outing.
Has this code ever been completely sorted out? Anything I can check on my own w/o having to take it to dealer? I'll be calling them tomorrow when they're open anyway.
TIA.
Quote:
Originally Posted by Pound
Did you find out what the code fault was?
that code is for the raw water low flow. there is a paddlewheel sensor that screws into the intake pickup tube for the raw water. Pull the paddlewheel out (unscrew the circular piece holding it in then just pull the sensor out) and inspect for debris. Can also take a look at the underneath the boat at the raw water pickup.
Likely if your not overheating its not a true water flow issue, but better to check it out and be safe.
"a paddlewheel sensor that screws into the intake pickup tube for the raw water."
Is this in the engine compartment somewhere?
I looked at any/all raw water pickups under the boat and didn't find anything noteworthy.
In the engine compartment. If you are inside the boat looking at the motor, it is on the back left down by the impeller but to the left of it. Look for a hose that has a circular object screwed into the hose. that's it.
Awesome! thanks a ton. This makes sense as it started happening when i was on the river where a small piece of debris could make it's way up in there. I'll get in there next time i get the boat out! Maybe take some pics too for others who come across this.
My boat had this the first 5-6x out and would only come on after about an hour of running it. I pulled the sensor out and messed with it countless times. The code has not come back on last couple times out. Engine temp is fine so I think my sensor was being overly finicky.
Replying so I can follow the thread, I have the same issue on my 2016 Mondo. Will check the engine compartment this weekend, if anyone has pics of what to look for it'd be greatly appreciated.
I got the same fault code. Mine was spn110 fmi 15. There is no fmi 1. I'm guessing this was a typo?
Sent from my SM-G935P using Tapatalk
I have gotten the fmi 1, not 15.