Can side tow points like the 2021 Supras have, be added to 2020 Supra tower?

Quote:

---

Originally Posted by UNSTUCK

Any reason not to chamfer the bottom side of the top face? I tend to find every sharp part on my boat and I'd find this one with my head. Ouch. Probably not as bad once it's coated.

---

I hadn't really given it much thought, it would be pretty tough to hit it I think but I can add a small chamfer to break the edge

Do you have access to a tumbler to soften the edges?


Sent from my iPhone using Tapatalk

Yep that's another option, messes up the nice pretty finish though as I don't have one dedicated to aluminum. It would be fine for pre-powder but not for raw

Even a deburring tool is good, the rope shouldn’t get much inside edge loading. It’s not like newbs are doing slalom from the side hooks.


Sent from my iPhone using Tapatalk

White
Powder is a dead on match for the factory powder on the tower.

Attachment 29344
Attachment 29345

I've been overruled by wife. She does not want white. The tower is .Black with red accent. She wants black or red. Do u have a red that'll match? I'll DM you

How long do those take to machine?

Probably 30 min for a set start to finish
Most of the time is in the design and cad/cam, fixturing etc

Quote:

---

Originally Posted by SONIC

Probably 30 min for a set start to finish
Most of the time is in the design and cad/cam, fixturing etc

---

I don’t think you are charging enough.


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by larry_arizona

I don’t think you are charging enough.


Sent from my iPhone using Tapatalk

---

I'm not, but I'm not trying to make a bunch of money I just like doing it.
I make parts and things for a lot of different communities I'm a part of, just a hobby of sorts.