September Pics and Vids

Printable View

Show 40 post(s) from this thread on one page

10-01-2021, 08:17 PM
Holdmybeer

Quote:

Originally Posted by HFarr

Wow! You basically poured a dumpster pad. Not much you can drive over that that will Crack it.

Sent from my SM-G781V using Tapatalk

You are correct sir.
Between my dually, boat, A/T scissor lift, there is 30k in weight sitting on the front 40x30 concrete. I didn't want any cracking. The back shop area is for welding, car lift and metal work, I figure I'll chip it someday but it won't break.
10-01-2021, 09:19 PM
haknslash

Quote:

Originally Posted by Kxmoomba

What mount are you using in the water? I just bought a mouth mount but not sure how that will work when you go under. Seems all the hand held polls that float are too short to get a good shot without too much movement in the video. I'll have a vlog up at 2:30 today from our last trip to the lake. Likely the last trip for the season as far as the lake goes for us. Codes in the boat and truck issues.

I’m just using a plastic pole that floats. It’s telescoping so it can be long or short. This is what I use https://www.amazon.com/GPE-10-Floati.../dp/B00B3YJG5C. It’s not perfect or the best but does the job. I don’t think I could deal with a mouth mount.
10-01-2021, 10:23 PM
brad460

Quote:

Originally Posted by jcarter20

Awesome! That is a shit ton of gravel. Better make sure it is compacted really well to avoid settlement under the slab. I would get a vibratory roller on that. Sorry, I am a commercial construction guy. Residential guys drive me nuts sometimes when it comes to backfill.

Sent from my iPhone using Tapatalk

I had stripped the top soil 5 years ago and filled with gravel, then it sat until this year. We decided to bring the slab up higher. Used traffic bond to bring it up another 12” and compacted it. The grade beam is 16-18” deep by 12” wide with two rows rebar. Concrete 4 1/2 to 5” thick at center. Wire mesh with fiberglass reinforced concrete.
10-02-2021, 11:19 AM
HFarr

Look who is moving to the SC headquarter city! The ultimate would be to take a factory tour of both plants one weekend!https://uploads.tapatalk-cdn.com/202...a5847fe2f3.jpg

Sent from my SM-G781V using Tapatalk
10-03-2021, 05:19 PM
BigOrange

Quote:

Originally Posted by HFarr

Look who is moving to the SC headquarter city! The ultimate would be to take a factory tour of both plants one weekend!https://uploads.tapatalk-cdn.com/202...a5847fe2f3.jpg

Sent from my SM-G781V using Tapatalk

We just heard about that here in TN. 750 jobs.
10-03-2021, 06:33 PM
Bigs28

2 Attachment(s)

Got some dock hammocks that match the boat perfectly. 22 software update has had a few hiccups but the idea is nice if the problems stop. Had some great weather this weekend.
10-03-2021, 07:10 PM
HFarr

Now those are cool looking! Did you put them in?

Sent from my SM-G781V using Tapatalk
10-04-2021, 07:27 AM
Bigs28

I did install them. Bunch if bowlines and half hitches.
10-04-2021, 09:13 AM
Mxmark4

Quote:

Originally Posted by HFarr

Look who is moving to the SC headquarter city! The ultimate would be to take a factory tour of both plants one weekend!https://uploads.tapatalk-cdn.com/202...a5847fe2f3.jpg

Sent from my SM-G781V using Tapatalk

Come on down! The cool thing is if you really want a boat and are examining all your options, you could do a factory tour of moomba/supra, drive a few miles down the road and do a tour with mastercraft and malibu as well. And possibly even yamaha. Theres also brunswick( sea ray bayliner, heyday) and supposedly the montara surf pontoons are being assembled down here as well or so claims my boat industry buddy who does fiberglass warrany repaies for heyday. All of these places are within 30 minutes of my place. So its cool to see all the options I have available around here. Come take a tour and holler at me if you go. Would love to tag along with anybody comin into do the tour!
10-04-2021, 10:15 AM
HFarr

Quote:

Originally Posted by Mxmark4

Come on down! The cool thing is if you really want a boat and are examining all your options, you could do a factory tour of moomba/supra, drive a few miles down the road and do a tour with mastercraft and malibu as well. And possibly even yamaha. Theres also brunswick( sea ray bayliner, heyday) and supposedly the montara surf pontoons are being assembled down here as well or so claims my boat industry buddy who does fiberglass warrany repaies for heyday. All of these places are within 30 minutes of my place. So its cool to see all the options I have available around here. Come take a tour and holler at me if you go. Would love to tag along with anybody comin into do the tour!

It would be "Come on up" for me. I am in South Georgia, but I definitely get the point! I just may have to do that one weekend. I didn't realize there were that many boat manufacturers in that area. Would be cool thing to do for sure. I will give you a shout if I ever get a weekend planned.

Sent from my SM-G781V using Tapatalk

Show 40 post(s) from this thread on one page