New for 2019

Printable View

Show 40 post(s) from this thread on one page

08-22-2018, 01:20 PM
That Guy

Holy moly! These will hold a box anchor?! How sturdy/thick are they? The one in my Axis was paper thin, only trusted a wet jacket and a couple dock lines in it. Are they rated for any weight or is he just getting lucky with that much weight in there? Are the side tubs just as sturdy? Sounds like a great use space that’s much needed!
08-22-2018, 02:37 PM
jcarter20

Perfect. Thanks. Mine is on order!

Sent from my iPhone using Tapatalk
08-22-2018, 03:07 PM
rdlangston13

Quote:

Originally Posted by That Guy

Holy moly! These will hold a box anchor?! How sturdy/thick are they? The one in my Axis was paper thin, only trusted a wet jacket and a couple dock lines in it. Are they rated for any weight or is he just getting lucky with that much weight in there? Are the side tubs just as sturdy? Sounds like a great use space that’s much needed!

It’s pretty thick, probably around 1/8”. It had no problems hold my small box anchor in addition to all the other items listed in Gooses post.

Sent from my iPhone using Tapatalk
08-22-2018, 06:29 PM
Isaguel

Quote:

Originally Posted by jcarter20

Perfect. Thanks. Mine is on order!

Sent from my iPhone using Tapatalk

This looks like an awesome addition. Where did you order it from?
08-22-2018, 07:24 PM
MJHSupra

Quote:

Originally Posted by Isaguel

This looks like an awesome addition. Where did you order it from?

From your dealer - per the post from Goose (above)
08-22-2018, 07:50 PM
larry_arizona

Quote:

Originally Posted by goose

Attachment 27557

Here is a pic of the tray that David Langston has in his boat. He can probably speak into actual usage of the tray more than anyone at this point...

He sent me this picture after he got his tray and he said in the tray he has a box anchor, shore spike, 4-12 foot docking lines, 1-100 ft anchor line, 1-50 ft anchor line, one tube rope, one wakeboard rope and handle, one surf rope and handle and about 6 bungee docking lines.

The tray is about 35 inches long and 28 inches wide. It is about 5.5 inches deep in the middle. Hope that helps. I haven't checked to see if it will fit in a Helix, but I will check later today...

2018 SA would fit a 28x28 tray, any of the new trays in that ball park?

Sent from my iPhone using Tapatalk
08-22-2018, 07:54 PM
KnoxMojo

Quote:

Originally Posted by larry_arizona

2018 SA would fit a 28x28 tray, any of the new trays in that ball park?

Sent from my iPhone using Tapatalk

Larry, I talked to my dealer, the issue with Supra is how the center support is made and the engine hatch is on hinges instead of a shock like Moombas.
08-22-2018, 08:25 PM
larry_arizona

The 28x28 fits between the hinges.

Sent from my iPhone using Tapatalk
08-22-2018, 08:32 PM
KnoxMojo

Quote:

Originally Posted by larry_arizona

The 28x28 fits between the hinges.

Sent from my iPhone using Tapatalk

I think there is more to it than that man, its the under side of the hatch as well for the walkover that is in the way when the hatch is closed.
08-22-2018, 08:42 PM
larry_arizona

New for 2019

Quote:

Originally Posted by KnoxMojo

I think there is more to it than that man, its the under side of the hatch as well for the walkover that is in the way when the hatch is closed.

Been looking at it tonight, 28x28x5” will work in the SA with some simple L brackets.

Hatch will shut no problem.

A wash machine drip tray would work no problem.

I got engineering skillz....lol

Sent from my iPhone using Tapatalk

Show 40 post(s) from this thread on one page