Heater Group Buy #2

I have a list of those intreseted. We have 3 fully in at this point and I have a long list of those that are intreseted but don't know were you guys are at. The only feed back so far is to do it near the end of March? That is fine with me.

One's that are in

Matt Glenn - 4 vent
Jeremy( centurion crew) 4 vent
thedug - 4 vent
bodybou- 4 vent ?


Post that have intrest( if you are in please send me PM of your info and what you want)

jpattigar
tp121
dokken
Lawdog
mrskidoo
surfmoocher
grantm
mastercraft
walb0244
macattack

I'm in for sure with a 4 vent. Do you think they will let me get with 4 hot tubes instead of 3 and 1 fixed.

March is fine with me. Just let me know when and what I need to do

Quote:

---

Originally Posted by mrskidoo

I'm in for sure with a 4 vent. Do you think they will let me get with 4 hot tubes instead of 3 and 1 fixed.

March is fine with me. Just let me know when and what I need to do

---

yes, it cost a little more...

matt

march is also fine for me!
and yes I'm looking for a 4 vent

I'm in for a 4 vent. When I call and order mine I'll talk to them about doing all four the hottubes. So I can see how much extra it is to do all 4 hottubes. Either way I'm still in for a 4vent heater. March will be fine.

email: brandon(dot)waldrop(at)us(dot)army(dot)mil
phone: 812-243-4593

Matt: tks for getting this all together, especially since the other boat site I belong to won't let us do group buys:((

I will post the prices over there; I 'm sure you will get some more buyers!

I vote for ordering as soon as possible, so we can get it installed and ready for early spring skiing!

Clarification: Once we pick a week and call in our order to Heatercraft, they will wait until Friday to charge our cards based on the number of orders. Say we do not get 10 orders, do we get a chance to opt out at that time or do we have the pay the extra $100 or so for the smaller order number??

Ref shipping costs ($25-$30), it looks like $18 UPS ground to central Florida.

My info: b52colmac at aol dot com; 352-589-8823

tks again, mac

Just a note of encouragement to you guys who are lining up to get a heater. It is a fantastic creature comfort and hard to overstate how much it is appreciated on those cold or cooler days. Without fail it will put a smile on the face of your crew. The heater on my Outback DD is one of the best factory options I ordered. If you are on the fence about this, just do it. And let's see the install pics.

Macatack, I will ask Danny that but I'm hoping we will have so many people in that if a few drop out we will still be good man. I think end of Feb / march would be good giving others time to jump on board. What about the 1st week in March?

Hey Matt: the 1st week of March sounds good, as I said, the sooner the better. Maybe if we get 15 or so comittments in the next week or so, we can pull the trigger earlier? Would like to get this "winter" project complete soonest:)

I know you mentioned this kit would satisfy the Vdrive folks, but are we paying extra for that or for the DD guys is there another kit available. Maybe it doesn't matter in the big scheme of things; guess we are only talking about the length of the water hoses to where you mount the heater box??

Is there any reason this 4-vent kit number (337H4CXL)is not listed on the Heater Craft website?

Add me to the 4-vent kit list.

tks again for working, mac

Quote:

---

Originally Posted by Matt Glenn

Number 314HCHXL ( These are complete kits) every thing you need plus these are all the XL kits so they will have plenty of extra length for you v drive people. He said you will not find these on the web they are not on website.

10 or greater ( between the two types) : 323.50

5-9: 422.50

Less then 5 is retail 530.50

4 vent ( same size box just one more hot tube )

10 or greater :$347.50

5-9: $459.75

1-4 retail: 559.00

Shipping is around 25-30 he said at heater craft

---

Great prices. I paid $396 for my 3 vent complete kit with 3 pull out hot tubes.

BTW, below is a link to my install if you are interested in seeing what is involved:

https://forum.moomba.com/showthread.php?t=10840