Good video, but why does your port plate show at 29 when you have the switch turned surf left? In fact, mine can only adjust in increments of 5...Quote:
Originally Posted by parrothd
Printable View
Good video, but why does your port plate show at 29 when you have the switch turned surf left? In fact, mine can only adjust in increments of 5...Quote:
Originally Posted by parrothd
Hahaha.. I didn't think anyone would notice that. It gets stuck every now and then and have to cycle side to side to clear it. Didn't notice it until editing..Quote:
Originally Posted by jared24
You're not originally from Michigan are you? You sound like you're from down under!Quote:
Originally Posted by Stazi
You are correct!Quote:
Originally Posted by rdlangston13
Sent from my iPad using Tapatalk
Autowake is AWESOME, that is all.
Sent from my iPhone using Tapatalk
So - I noticed on the 2019 models that you can store autowake settings per setting (Wake, Port Surf, Stbd Surf). But on the upgraded firmware I have on my 2017, it doesn't include the amplitude setting (just roll and pitch).
While I don't have the amplitude sensor, I do find that the amplitude setting controls the ballast fill levels when in Wake setting. When I'm kneeboarding, I don't want full ballast. But I do when surfing. Presently, I have to remember to adjust that setting when I switch between wake and port/stbd surfing or else it dump ballast (low amplitude) or adds too much (high amplitude).
That seems to me an easy setting to have remembered in the autowake settings so that it automatically adjusts based on which mode you are in. Is there a newer firmware that we can get that might have that setting? Any thoughts to adding it to those of us with "older" boats?
chezdude
Hello all I am new to the forum , I am in SE Wisconsin and just bought my first boat a 2019 Helix with autowake and 2.0 surf system. This video was very informative, thanks for posting. I will be putting my boat in late April , I can’t wait. The dealer is going to go out with me the first couple times to help me learn all the boat has to offer but I’m sure I will still have a bunch of questions. I am really only interested in surfing , I look forward to dialing in the best set up.
What great information! I’ve read this from start to finish. I just upgraded from a ‘13 SA to a ‘19 SL and can’t wait to try AutoWake once our Indiana weather cooperates. Quick question, I was reading that the newer boats have ballast sensors but maybe that is Moomba only. I can’t find anything in the manual and I had water firing from each ballast overflow. It ran for quite a while and I see from goose that I could damage things. Clearly there wasn’t an auto shutoff. This happened on my first and only time filling. I’ll adjust the timers going forward but was curious if the SL was supposed to automatically shut off and recalibrate. Thanks everyone for the great info!
When you see the water coming out of the overflow just turn off the ballast pumps. Bags are completely full at that point. You should time how long it take until you see water flowing out and then go into your fill timer settings and enter that time it took to fill. From then on you should be good to go.
I believe the 19 Supras have ballast sensors and adjust timers automatically.
However, I recall it may have been a mid season change similar to the 1.76 transmission
Sent from my iPhone using Tapatalk