I'm always a day late and dollar short! I just ordered the 2.0 retrofit for 08 LSV! Guess I'll have to start saving for 2019 Craz!
Printable View
I'm always a day late and dollar short! I just ordered the 2.0 retrofit for 08 LSV! Guess I'll have to start saving for 2019 Craz!
That's an excellent mod! Is that thing hinged?
Brett, the Max bow bag is actually a 1000lb bag completely under the floor. Again, with some work, you could probably plumb into it to add an integrated bow under the bow cushions, but again you would probably only want to run more front weight, if you added a LOT more rear weight. Instead of that, I have found that by adding weight in the middle, it is the best of both worlds, without drastically affecting your storage. You could probably get up to about 700lbs on each side under the lounge cushions. YES, it really is that big and deep. That would be an additional 1400lbs. That would be similar to adding a 500lb integrated back and an additional 450lbs on each side in the rear. However, with the 1400lbs in the middle and with the rear storage bins and non carpeted storage under the bow cushions, you have way more accessible storage.
Trayson, I was just walking through the plant today and saw a few black and blue boats. I was just curious if maybe one of these were your future boat. hahaha Attachment 26147Attachment 26148Attachment 26149
Personally, I really like the new Ultra Blue metal flake. I think it looks great. On that one, I would probably have gone with larger Moomba logo. The Black metal flake also looks really cool. And the Brittany metal flake and black is actually a Helix. When I saw that one, I thought for sure you had ordered your new Max. hahaha
Anyways, thought you might enjoy these color combos...
LOL. very nice. You've definitely got my number.
And yeah, I do like this color combo with the flake. I would totally rock that.
https://forum.moomba.com/attachment....7&d=1503667422
Ultra Blue Metal Flake FTW! Love ours, it looks so good!https://uploads.tapatalk-cdn.com/201...ebc10a18a7.jpg
https://uploads.tapatalk-cdn.com/201...5a9de11238.jpg
https://uploads.tapatalk-cdn.com/201...9c9c66f507.jpg
Sent from my iPhone using Tapatalk
^^^^Picwhore! LOL
Remember I am not in marketing, so the quality of my pictures are not overly impressive. haha.
But as you can see, this is the port lounge cushion storage area. At the deepest point, it is a little over 25" to seat bottom. Then length between stringer walls is about 46". I was going to send you a pic of the R&D boat with a standard fly high fat sack in there, but then I realized how dirty that boat was and didn't want to post it on here for my boss to see. hahaha
I also took a shot to show how the bow backs are hinged and the area behind the drivers footwell. As you can see on this model we put a free air sub in there currently, but there is plenty of room and accessibility to install a nice sub box and be able to work on it. You can also see in the picture how the storage is non-carpet with nonskid. It really adds a lot of storage up there that in the past was full of an IBS system.
I knew you guys would like that Ultra blue boat. I think it is currently my favorite color...
Attachment 26152Attachment 26153Attachment 26154