Printable View
Some hydro
http://img.tapatalk.com/d/14/03/31/ha2ugamy.jpg
Floor before
http://img.tapatalk.com/d/14/03/31/2uze4yte.jpg
Floor hydro
http://img.tapatalk.com/d/14/03/31/yqyga9am.jpg
Used a die grinder to flatten the sides just in case it's a tight fit
http://img.tapatalk.com/d/14/03/31/abe4usuz.jpg
Sent from my Nexus 5 using Tapatalk
That is looking great! Nice job on the restoration.
Well played sir!
Any plans to redo the insides of the locker floors with Hydro? Still on my wish/to-do list.
You mean the floor ski locker? Nope, I try to never open that... lol...
I put a deposit on a 06 LSV so I'm just trying to finish this asap...
I am new to Moomba with a 2006 LSV. The previous owner just redid the interior for me! Can't wait to hit the lake.Quote:
Originally Posted by parrothd
WOOO! Old boat is still in pieces and a new one is on the way! So I'm not the only one that does that...Quote:
Originally Posted by parrothd
I just have new carpet, how is the Hydroturff to work with? How much do you think you spent just on the Hydro? Are you putting Hydro wherever carpet was, so no carpet on board any more?
I replaced the main carpet area, where you walk. I had planned on adding a diamond turf pattern to the ski locker/bow area but if sell it, that's out. For my older style LSV I used 2 sheets, pulled the old carpet off, used a sander/scraper to clean the glue off. Lined it up and then peel and stick(used tape to hold one side, the rolled and peeled the other to keep everything aligned). Also used a heat gun to help around the edges and stubborn areas. Probably took about 1-2 hours to get done...Quote:
Originally Posted by sivs1
15% off with HYDRO15 coupon... :)
http://www.pwcmuscle.com/hydroturf-sheet-47-x-86.html
Hydroturf Sheet 47" x 86" $79...add $40 for the stick on backing
Lots done this weekend..
Making a template for the hydro, the ski locker was supposed to be diamond cut, but I messed up.. :mad:
http://img.tapatalk.com/d/14/04/07/3u4y4edy.jpg
http://img.tapatalk.com/d/14/04/07/9amepuby.jpg
Sent from my Nexus 5 using Tapatalk
http://img.tapatalk.com/d/14/04/07/a9uryzyq.jpg
http://img.tapatalk.com/d/14/04/07/4une8uhu.jpg
http://img.tapatalk.com/d/14/04/07/6e2eqada.jpg
Sent from my Nexus 5 using Tapatalk
http://img.tapatalk.com/d/14/04/07/vy7utuze.jpg
http://img.tapatalk.com/d/14/04/07/tumasyba.jpg
Sent from my Nexus 5 using Tapatalk
Looks so nice, not sure if I really want to sell it.. Im checking out an 06 lsv, but I'd have to start all over again..
Sent from my Nexus 5 using Tapatalk
Done.. Finally..
http://img.tapatalk.com/d/14/04/18/a8agehym.jpg
http://img.tapatalk.com/d/14/04/18/ata3usyh.jpg
http://img.tapatalk.com/d/14/04/18/9e2emyby.jpg
Sent from my Nexus 5 using Tapatalk
You mean "almost done". You still need to;Quote:
Originally Posted by parrothd
- Install the swim deck
- Get the boat on the lake
- Take more photos
- Post those photos
- Accept a whole bunch of "Great Job" posts because you did an awesome job!!!
6. Drink beer/relax! Lol, looks great!!!!!
Looks awesome. Good job. I don't think I could have done it. And by "don't think" I actually mean no way in hell I could have.
Wow... I went thru the whole thread... Wow... awesome work..
Awesome job!!!! I think you have a second career, assuming you want it ;)
I think that should be changed to;Quote:
Originally Posted by beat taco
6. Cruise the boat around showing off the new sporty interior
7. Drink beer (with Eric!) & relax
1. Install swim deck
2. Take to marina for acid wash and dealing
3. List on for sale sites
4. Start all over with new lsv I'm buying..
Sent from my Nexus 5 using Tapatalk
Seek help for upgraditis...
Sent from my Nexus 5 using Tapatalk
Sounds like a done deal. Congrats. Think of that one as practice and the new one as perfection. It will be a keeper.Quote:
Originally Posted by parrothd
Here's my how to...
https://sites.google.com/site/moombaupholstery/
You sir are a ROCKSTAR! Awesome work and write-up!
Sticky awarded!
Very nice writeup!!!
what hydro turf did you get?..never mind i went back two pages haha..what do you think looks better..the stripped or diamond? i wouldnt mind eliminating carpet in gen.
I like the cut diamond in the walk way area, I messed up and only had enough for the front section. It might be to busy for the main area.
Sent from my Nexus 5 using Tapatalk
i think i might bite the bullet and do the same in my 04. you got the sheets with the PSA on them right? if so im looking at about $263 shipped
Yep the PSA is really easy, use the discount code I posted..
Sent from my Nexus 5 using Tapatalk
Soooo??? No beers for Eric??:sad:Quote:
Originally Posted by parrothd
Beer? What's that?
Sent from my Nexus 5 using Tapatalk
Great work. Is that hydro turf in the cut outs for the cup holders too?
Sent from my iPad using Tapatalk HD
Carpet, the hydro was the plan but the carpet was quicker..
Sent from my Nexus 5 using Tapatalk
Last update..
I was able to carefully remove the the covers of my 06 LSV and repair the seems..I reused everything, the center cushion is to far gone, but can wait till winter...
http://img.tapatalk.com/d/14/05/16/a9atubuj.jpg
http://img.tapatalk.com/d/14/05/16/e2a2utaz.jpg
Sent from my Nexus 5 using Tapatalk
Hello - I have been following your progress on this project - GREAT JOB.
Two questions: 1) What weight / thickness of Marine vinyl did you use? 2) Did you reuse foam padding? If not, what type (density) did you use?
I reviewed the link on the marine vinyl source but did not see any explanation of thickness / weight. Thank you!
http://www.garysupholstery.com/nauga...spiritmil.html (37.5oz)Quote:
Originally Posted by Lynn Syndrom
When I checked around that's the heaviest and was most expensive. I reused the foam on the sides/backs, if you use a steamer the foam will expand to it's original shape. The seat foam may need to be replaced, you can try steaming those as well, on mine you could tell where people sat. Once you replace 1 or 2 cushions the rest will look different so you'll end up doing them all. For the seats cushions I used Firm.
http://www.rochfordsupply.com/shop/F...128/index.html
Got the info- thanks. I'm only replacing the ski locker covers as the seams let go and they have several tears also. The rest of the interior is in average to above average shape. Again - nice work.
To make life easier you may want to replace it all with one color per cushion. Save a lot of time and money..
I was kneeling on the sun deck as I covered the boat for the last time after winterizing and heard a loud "pop". Lifted the cover where my knee was and a nice big spider web crack in the vinyl. It wasn't even freezing yet. I guess I will be replacing sooner than later. Glad to have this thread.
Great effort! Where did you find matching vinyl?