2015 Moomba Mondo drive submerged

Quote:

---

Originally Posted by bealaddison

Well, got home today and was finally able to check everything out. Neither the drive nor the transmission had any signs of water but I changed them anyways.

My bilge pump does not operate in manual mode with the master switch off. The auto function is not working at all now. Will be changing that out tomorrow.

My transducer was leaking slightly, I had pulled it to clean the paddle wheel and torn a gasket. Thankfully I was installing a new transducer anyways so had all new pieces for that.

Install my newly recovered engine hatch and took the boys surfing!

All is good…let summer begin!


Sent from my iPhone using Tapatalk

---

Check the battery area, you may have missed a cable, the auto bilge operates directly off the battery.

Took the bilge pump apart and found some debris around the float. It is working in auto now. FYI it was very dirty, cleaned the float and it’s working well.


Sent from my iPhone using Tapatalk

Awesome! It's a good feeling to know it was something easy, and more important, something that is working now!!

Sent from my moto z4 using Tapatalk

Periodic checking of the bilge pump is a must. The pump will jam up sometime. I never figured out where the little crap comes from but it doesn't take much.

Update:

Bilge pump jammed and tripped the breaker. Founda piece of rubber that looked like for the serpentine bent jammed in the impeller. Also the auto feature works great when bobbing around the lake but does not work at all when sitting calmly beside the dock and filling slowly. New bilge pump will be here tomorrow.


Sent from my iPhone using Tapatalk