I have an 06 24V but it doesn’t carry much weight at all or if any on the bow. Your bunks should take all the weight with the majority concentrated near the axles.Quote:
Originally Posted by eder10986
Sent from my iPhone using Tapatalk
Printable View
I have an 06 24V but it doesn’t carry much weight at all or if any on the bow. Your bunks should take all the weight with the majority concentrated near the axles.Quote:
Originally Posted by eder10986
Sent from my iPhone using Tapatalk
Website says up to 6000# boat
Sent from my iPhone using Tapatalk
So as my signature states I have an SE, anyone have a good place to buy some on Amazon?Quote:
Originally Posted by zabooda
https://www.walmart.com/ip/BoatBuckl...3-2pk/32926701
these are the ones I added to all 3 boats. larry commented on stainless versions that can be had for a benjamin but I've never spent the coin as I don't boat in salt.
I've seen some pretty large twin/triple engine go fasts at the gas pumps using the same ones so I would think they will work fine for an SE but ymmv.
I have stainless boat buckles too. Not 100% necessary for SS and my use. But absolutely best tiedowns ever.
Sent from my iPhone using Tapatalk
Drotto can take a 10k lb boat. Might look into that one.
Sent from my iPhone using Tapatalk
Also - boatmate confirmed it’s a friction plate. Will likely need to be replaced.
Sent from my iPhone using Tapatalk
glad they were able to assist. good folks there and build a great trailer.Quote:
Originally Posted by eder10986
I got a pair of G2 SS boat buckles $83 shipped from Wally World.Quote:
Originally Posted by sandm
Lube the shit out of the mounting hardware and torque slowly.
Sent from my iPhone using Tapatalk
Ordered, thanks brother!Quote:
Originally Posted by sandm