-
Glad you got a hold of Jerry. I had mine in a week. I thought that was pretty quick. Let us know how it goes!
-
Fixed since 2008 doesn't seem right; mine is a 2008.
-
Brad,
Sorry to see the boat was sold and then the trailer issue. Hope you're back on the water soon!
-
Drew,
I have 3 different 21V's picked out within 300-400 miles away.. That is my tent. plan.. but with all going on at home, I kinda wanna go all winter without one..
Plan on going with 21V regardless...
-
Axle arrived by UPS this am... I came home at lunch.. prepped it and have primed it.. will be painting it later after the primer is dry.. a couple of coats of paint.. we'll be installing tomorrow!
Thanks again to Jerry @ Boatmate for getting it out so quickly!
-
Hope it goes smooth for ya!
-
-
If I can do it, anybody can do it
-
1 Attachment(s)
IT IS FINISHED... i am worn out.. started about 8:30 this am.. just finished.. getting the left side torsion arm back on was A BUGGAR..
One Tip for anyone who has to do this.. WEDGE the opening on the torsion arm.. Put a chisel in as far as you can.. When i put on the right side, i pushed the chisel in as far as I could BEFORE i started trying to put it on..
And as far as the ANGLE adjustment, If you Have an Iphone, there is an app IHANDY LEVEL that will show you degrees... thought that was a good use of an iphone!
Attachment 12294
-
glad you got r done.
now on to the next stage....
