Changed the gear box that connects the to the steering rack on the cable and the cable and steering is still sloppy. No luck
Sent from my iPhone
Printable View
Changed the gear box that connects the to the steering rack on the cable and the cable and steering is still sloppy. No luck
Sent from my iPhone
I have the same issue with my boat, could it be because the cable itself is flexing, it seems like the cable is really long and I would think over that distance if it were not strapped down good it would move. I may be way off here I don't know. Next time I get my boat out of the water I will play and see
Well i have been behind the wheel of some other boats recently and my buddies Axis A20 does the same thing as well as my buddies Supra 21V so I guess this is just normal. The best way to fix this is not to drive a new SA so you never know any different!
You would think that something that loosens up could just be tightened up. :mad:
I found something loose on my 2012 LSV ill take a pic I bet its your issue to.
Here's what I did, I removed the part link or something what ever it's called it seems under high load the part opens up and the bushing plays back and forth , I removed it and squeezed it back together .
Hope this helps http://img.tapatalk.com/d/14/08/01/uge3equ8.jpg
I new something was wrong when I couldn't hold a strait line pulling a boarder . Issue was solved
Thanks, I will check this out next chance I get!
Ditto! Worth a shot.
I still had a bit of play and found these two Allen keys loose http://img.tapatalk.com/d/14/08/04/8erame5y.jpg