Go Home auto wake feature for 2021

Quote:

---

Originally Posted by TXSurf4

Reviving this one to see if anyone knows if you are able to change the "set" speed for the Go Home feature on a Moomba? Its default is 25.

---

After you engage go home, just tap down on your speed until you get it to what you want.

Quote:

---

Originally Posted by KnoxMojo

After you engage go home, just tap down on your speed until you get it to what you want.

---

Will it save that speed for the next time I engage it? Or do I have to reduce it every time?


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by TXSurf4

Will it save that speed for the next time I engage it? Or do I have to reduce it every time?


Sent from my iPhone using Tapatalk

---

Since you can't save profiles, you'll have to do it every time, you can also increase speed as well this way. I use go home on my SA and just adjust speed to what the water dictates, no big deal.

i never turn cruise control off, so the plate stays where I want it.

Quote:

---

Originally Posted by KnoxMojo

Since you can't save profiles, you'll have to do it every time, you can also increase speed as well this way. I use go home on my SA and just adjust speed to what the water dictates, no big deal.

---

Understood. I just wasn’t sure if there was somewhere to adjust and save the setting for the Go Home preset. Thanks


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by TXSurf4

Understood. I just wasn’t sure if there was somewhere to adjust and save the setting for the Go Home preset. Thanks


Sent from my iPhone using Tapatalk

---

You might can look in your dealer settings to see what all is in there, code may be 9191 be default. If you've never been in those menus, won't hurt to look at them.

Quote:

---

Originally Posted by KnoxMojo

You might can look in your dealer settings to see what all is in there, code may be 9191 be default. If you've never been in those menus, won't hurt to look at them.

---

Okay I’ll take a look at it this weekend. Thanks.


Sent from my iPhone using Tapatalk

So just to make sure i understand, If i am fully loaded and struggling to get up on plane I need to have autowake on, cruise control on, and hit the "go home" button and that will deploy all 3 tabs to get up on plane faster?

Quote:

---

Originally Posted by 996scott

So just to make sure i understand, If i am fully loaded and struggling to get up on plane I need to have autowake on, cruise control on, and hit the "go home" button and that will deploy all 3 tabs to get up on plane faster?

---

If autowake is on, cruise is on, that is what engages 3 tab launch on Moomba. If you don't want autowake running, you can fool it by leaving a ballast switch to fill, autowake won't engage, but you will still get the launch. Hope that helps

Quote:

---

Originally Posted by 996scott

So just to make sure i understand, If i am fully loaded and struggling to get up on plane I need to have autowake on, cruise control on, and hit the "go home" button and that will deploy all 3 tabs to get up on plane faster?

---

By “fully loaded” you mean with all of your ballast full or just loaded up with gear and people?


Sent from my iPhone using Tapatalk