The PPI amps are legit... that 1000.1 is a mean sub amp. I've got mine at 1 ohm powering 2 W6's, and it gets down. I for a while ran a PPI on the Rev410, but couldn't get it adjusted well.
Printable View
The PPI amps are legit... that 1000.1 is a mean sub amp. I've got mine at 1 ohm powering 2 W6's, and it gets down. I for a while ran a PPI on the Rev410, but couldn't get it adjusted well.
Damn. I've got my 12w6 running off that one kicker amp and it's getting around 700 rms at 2 ohms. Was thinking about adding another w6 but wasn't sure how I'd power it. That 1000.1 seems like a legit solution.Quote:
Originally Posted by Broke Pilot
Sent from my SM-G930W8 using Tapatalk
what did you find yourself lacking with the REV410 on the 600.2? I'm feeling okay with mine. Did you have a WS420SQ to adjust the levels and EQ of the tower zone?Quote:
Originally Posted by Broke Pilot
To be honest I think it was more of a problem with the head unit I installed in the boat, no matter what I did with the crossovers on the amp with the head unit set to flat curves it just never sounded right. Always had too much low end and it would clip before it really got loud.
Once I added another 410 on that massive SD4, holy s***... it was amazing.
I'd never hesitate to use those PPI amps again. Can't beat them for the $$ and fast shipping on amazon!
If anyone needs a 600.2, I have one I'll sell.
Do it! You'll love it. Are your W6's 10's or 12's? I have 2 10s in a ported box and love it. Can't wait to get it installed in the new SA. I need to make another thread on here and see how everyone has done their SA. I'm having a hard time coming up with good ideas.Quote:
Originally Posted by mattsask
[QUOTE=trayson;318377]The amp rack. Future plans are to use a sheet of expanded core plastic on stainless steel standoffs to cover the wiring.
http://i1070.photobucket.com/albums/...psisfl67om.jpg
That's what it looks like when you let a CPA do what a engineer should be doing....;)
Issue was the amp. Its not designed to properly run bridged to a full range mono speaker pod.Quote:
Originally Posted by Broke Pilot
Attachment 26446
2017 Mojo
Javelin is powering 12" Exile sub and (6) 6.5's, WS is powering a pair of Rev10's.
How so? What makes the PPI amp any different than another bridged 2 channel?Quote:
Originally Posted by MLA
Nothing different then about 99% of 2 chnl amps. Its the 1% thats different.Quote:
Originally Posted by Broke Pilot