RMK818-Single ghetto Gate

So does mine

Quote:

---

Originally Posted by mikenehrkorn

I tried a few different angles too and it didn't seem to make any noticeable difference.

Using the clip pin in one end of the arm allows mine to fold pretty much flat so storage shouldn't be an issue at all.

With the cheap cutting boards I think I'm only in for $60 and that is for BOTH the regular and goofy gates!! Hands down the best $60 I have ever spent on any boat!!!

---

Based In your experience, any reason I couldn't cut the gate out so that one works for both reg and goofy?

What are gate... Tab dimensions.... How long front to back...

Sent from my SM-G900T using Tapatalk

Quote:

---

Originally Posted by c h r i s

Based In your experience, any reason I couldn't cut the gate out so that one works for both reg and goofy?

---

Read the details on the orig post -- that's what RMK did I just didn't want all that hassle so it's definitely possible with careful measuring.

Quote:

---

Originally Posted by clarkely

What are gate... Tab dimensions.... How long front to back...

Sent from my SM-G900T using Tapatalk

---

Cut out that goes around the platform bracket is 9 1/2" x 6".

Though I did find the first flaw...the bottom of the cutout is only 3" wide and the 1/2" material gave out and broke off. Thankfully the bungee held it until we stopped and I could recover the rest of the gate. So it seems that a thicker material is needed at least on that section.

But not to be deterred and loose the rest of the holiday weekend, I found some scrap decking and screwed it on!!! Creates a bit more spray but still does the job until I can get a more permanent fix. :)

Attachment 22421
Attachment 22422

Now that is truly ghetto. Just kidding...whatever works right?

Quote:

---

Originally Posted by mikenehrkorn

Though I did find the first flaw...the bottom of the cutout is only 3" wide and the 1/2" material gave out and broke off. Thankfully the bungee held it until we stopped and I could recover the rest of the gate. So it seems that a thicker material is needed at least on that section.

---

I wonder if it broke due to pressure forcing that piece up, so it snapped by pressing on your platform support, of if the gate seperated from the hull a little, and there was front to back water pressure that broke it....

Quote:

---

Originally Posted by tarheelskier

Now that is truly ghetto. Just kidding...whatever works right?

---

Definitely, but the addon got us thru the weekend!! Now time to find some 3/4" material and fix it up.

Quote:

---

Originally Posted by csm

I wonder if it broke due to pressure forcing that piece up, so it snapped by pressing on your platform support, of if the gate seperated from the hull a little, and there was front to back water pressure that broke it....

---

Honestly not sure what really broke it. Didn't really do anything different, but that section that broke is the smallest. Oh well, just have to rebuild with a bit thicker material.

You can buy 3/4 pvc running stock or sheets.... I sell a pvc product excel by rain industries that way...

What are measurements if the actual gate piece....

Sent from my SM-G900T using Tapatalk