Ronix Parks Carbon Thruster - First Ride Impressions

v2's run around $100 for a set for that board. fins are not cheap, but can drastically alter the boards riding characteristics. think like what a new prop does for a boat.

I'd pick up a set off the link above. worst case, sell them on here or another boat forum. someone will buy you out for what you have into them minus shipping. they do make a world of difference if they are the right fin. if your kid is progressing, will give them some comparisons to help their riding style if you decide to keep the board.

Quote:

---

Originally Posted by smorris7

They may have other colors, but it must be the XL size. Also the other colors may run you 120.00

---

I think the green is really growing on me..

Quote:

---

Originally Posted by sandm

v2's run around $100 for a set for that board. fins are not cheap, but can drastically alter the boards riding characteristics. think like what a new prop does for a boat.

I'd pick up a set off the link above. worst case, sell them on here or another boat forum. someone will buy you out for what you have into them minus shipping. they do make a world of difference if they are the right fin. if your kid is progressing, will give them some comparisons to help their riding style if you decide to keep the board.

---

Good analogy. Just ordered a set. What have I got to lose. Really want to like this board.

Thanks for the advice fellas!

the only downside are just like a new prop on a boat, you can get great results and get worse results.
they make some of the best fins in the industry so I would imagine that it will be an improvement. most boards(including soulcraft) are shipping with some pretty cheap basic fins.

Ok fins arrived today - and I learned that when you buy "one" it is actually a set of 3, two outsides and one inner. So now I have 6 fins....

Anyway, it is easy to tell which fin is the center - both edges are rounded. The other two have a flat edge and a curved edge, so basically a left and a right. Thing is I have no idea which is which and there are no indicators on them or in the package.

So I'm guessing you want the flat edge facing toward the center of the board, and the rounded edge facing the outside? Or vice versa?

I say put 3 fins facing down and 3 facing up. That way you can kick flip the board and ride on the opposite side. Plus the board will be less loose when its upside down with the traction pad and rear kick in the wave.... That coupled with the orange flotation device you were wearing would let everyone know who's the pro.

Quote:

---

Originally Posted by bergermaister

Ok fins arrived today - and I learned that when you buy "one" it is actually a set of 3, two outsides and one inner. So now I have 6 fins....

Anyway, it is easy to tell which fin is the center - both edges are rounded. The other two have a flat edge and a curved edge, so basically a left and a right. Thing is I have no idea which is which and there are no indicators on them or in the package.

So I'm guessing you want the flat edge facing toward the center of the board, and the rounded edge facing the outside? Or vice versa?

---

Yes that is correct. Try it with all 3 as a thruster and see what you think. THEN remove the center fin. Also make sure your outside fins are as far FORWARD as possible.

Will do - thanks for the advice!

Well, did you have a chance to ride it with the FCS fins? How did it go?

Unfortunately no. By the time we got done WBing and trying to kill the kids on the tube we got blown off the river with 20mph winds. Leave for another 4 day weekend Thursday though so hopefully...

Hey berg, any updates. ??