Moomba CRAZ Options & Color

Quote:

---

Are you following a break in procedure?

---

By the book! Kind of a PITA but the new owner will be very happy to know it's been done correctly. You don't know how hard it was to not fill the ballast and give it a go when you have hours of flat water. Here's another shot my buddy got with his drone...
https://scontent.fsnc1-1.fna.fbcdn.n...be&oe=5786EC6B

Quote:

---

Originally Posted by DFTR Josh

By the book! Kind of a PITA but the new owner will be very happy to know it's been done correctly. You don't know how hard it was to not fill the ballast and give it a go when you have hours of flat water. Here's another shot my buddy got with his drone...
https://scontent.fsnc1-1.fna.fbcdn.n...be&oe=5786EC6B

---

It is really hard! I put about .6 hours on before surfing. Lol

Nice drone shot!

Quote:

---

It is really hard! I put about .6 hours on before surfing. Lol

---

So true! This was the water all weekend :eek:
https://scontent.fsnc1-1.fna.fbcdn.n...91&oe=578DB85A

Quote:

---

Originally Posted by DFTR Josh

So true! This was the water all weekend :eek:
https://scontent.fsnc1-1.fna.fbcdn.n...91&oe=578DB85A

---

Yep, you have more will power than I!

Wow that is BeauTiFul water!

And we probably only see 5 boats total the whole weekend. Never got in the water but DAMIT the break in is pretty much done. Probably one of the best weekends in Powell, just sucks breaking in a boat and not riding.

Quote:

---

Originally Posted by DFTR Josh

Racked up 9 hours on the Craz this weekend. This boat is truly amazing.
Attachment 23734

---

What's the difference with "ride, wave, Room, etc." compared to your Tomcat?

Quote:

---

Originally Posted by DFTR Josh

Yep, exactly what I experienced on SAT and what I read online. Now that I know what I'm looking for I will have a better answer but expecting back to 50% when the boat is keyed off. Nothing in the manual about it for some reason but if not keyed off it will remember the last position and go right back to that if I throttle down then back up like picking up a rider. I was like WTF is this plate doing, LMAO!

---

I wonder if you could wire whatever controls the memory to the wake plate to like the stereo turn on switch so you can key off without it losing it's memory. As long as you dont turn the stereo off you would be good to go!

Quote:

---

What's the difference with "ride, wave, Room, etc." compared to your Tomcat?

---

Wave/Wake I don't know yet since the ballast bags yet to be filled. For some reason it does seem more sensitive with side to side weight so far. The ride is far better then my Tomcat in regards to performance. The difference between the PCM343 and Indmar400 is AMAZING! The Craz drives so much better, always felt like I was fighting something when turning port on the MB with some steering wheel vibration. The Craz feels like it's got power steering and nothing really felt in the steering wheel. Turning at speeds, no way you can compare both. With the deeper V on the MB it seem to bog down when doing a simple turn around. Craz was very smooth in any turn I put it in and I really had to dig into a turn to get it to bog down. Craz turns like it's on rails and drives like a high end sports car. Hands down the Craz wins the driving aspect compared to MB BUT my big rave about the Tomcat was it's amazing wake. We will see shortly about this comparison just don't have the right data to do now.

How many break in hours do you have left? Are you running stock ballast?