Printable View
So a little more info. You need the extended tongue in order to get the removable steps. I gave boatmate my VIN number and they called me back a few hours later saying it wasn't possible with my shorter swing away tongue. Damnnnnitttttttt I just saved my self $350.
Sent from my iPhone using Tapatalk
LOL. How long is the standard vs extended tongue? I know the tongue on my 17 Craz is quite a bit longer than the one that was on my 15 Axis....both are Boatmate trailers...Quote:
Originally Posted by BrettLee3232
How did you mount the sub? Is it free air just mounted in the panel or did you build a box behind the panel somehow? Pics/measurements if so?
There is actually an outline on the back of the panel, cut it like a dotted line and that's it. I didn't build an enclosure or anything, it does great though! She bumps! [emoji41]Quote:
Originally Posted by That Guy
Sent from my iPhone using Tapatalk
Cool, didn't realize that so thanks for sharing. I'm pretty sure I'm going to build a box but good to hear it sounds good without one. I've heard otherwise even from my dealer but granted that was with a different sub.Quote:
Originally Posted by Stimbert
Where did you get the fenders? From boatmate directly? I was under there this weekend and didn't realize how easy they are to get off.are there aftermarket fenders that you have heard of?Quote:
Originally Posted by Stimbert
Sent from my SAMSUNG-SM-G930A using Tapatalk
Yep, these are directly from boatmate. Gave him my vin, they know exactly what ones I had. Told him what width wheels I was changing to and these are what we came up with. 4 bolts and you reuse the pads.
Sent from my iPhone using Tapatalk
If you don't mind me asking how much did you pay for them including shipping?Quote:
Originally Posted by Stimbert
Sent from my SAMSUNG-SM-G930A using Tapatalk
I don't remember exactly but not much. 100ish each
Sent from my iPhone using Tapatalk
Think I'm gonna go that route, the fact they are that easy is a game changerQuote:
Originally Posted by Stimbert
Sent from my SAMSUNG-SM-G930A using Tapatalk
Lol. Sweet!
Sent from my iPhone using Tapatalk
How wide is the step down you added to the seat? Did you just match the walkway width on the sundeck? If you had to cut the HDPE or Starboard, how did you finish the edge?
I'm about to order the material and cut my foam, but having a clean edge on the cut HDPE concerns me.
Yes, I just matched the walkway. Just used a router to round off the edges.
Sent from my iPhone using Tapatalk
HDPE is very easy to work with. Carbide blade on a circular saw cuts it like butter and a round over bit in the router to ease the edges.
Yeah, I've cut it with the circular table saw, just haven't had any project where the edge needed routing so I was curious. I have some scrap I'm going to practice on. Appreciate the feedback!
Sent from my SAMSUNG-SM-G930A using Tapatalk