PM sentQuote:
Originally Posted by Mg3playa
Sent from my iPhone using Tapatalk
Printable View
PM sentQuote:
Originally Posted by Mg3playa
Sent from my iPhone using Tapatalk
Can you PM me as well that info! Thanks you!
PM sentQuote:
Originally Posted by cr222
Sent from my iPhone using Tapatalk
Brentlee, any chance you could PM some of the info you have of adding 2.0
Does anyone have contact information on getting their hands on the 2.0 upgrade. I'm looking to upgrade the 1.0 tabs and have tried emailing and calling wakeland with no response.
Bump
Someone want to help this guy out? He's posted on multiple threads trying to get info on 2.0
I've heard from others that Wakeland MFG isn't great about returning calls or emails. It sounds like he already has their contact info, so can't say there's much we could offer beyond that. I suppose he could try going through a dealer, but not sure that would yield any more success than he's had thus far...Quote:
Originally Posted by 13mobiusLSV
Trayson (thanks for replying) you are correct, wakeland is not the greatest in returning calls. I was hopeful that brentlee or others have another contact inside wakeland other then the provided number. I can't believe they would offer direct purchase without a shopping cart option. I haven't had such a difficult time trying to give a marine company money.
PM Sent.Quote:
Originally Posted by tubby
Sorry it took so long 😳
Sent from my iPhone using Tapatalk
can anybody tell what actuator they use for the 2.0
Same as the 1.0 lenco I believeQuote:
Originally Posted by dand393
Sent from my iPhone using Tapatalk
Brett could you please PmM the info to me too please. ThanksQuote:
Originally Posted by cpropes2005
Sorry Brett but I would love the info as well
I will share my experience. Call the Wakeland mfg number from the website (never had luck with email) ask for the 2.0 upgrade. Pretty standard set pricing. I believe they just fill orders when their factory orders are caught up (5 weeks for me). You pay when they ship. Had the best luck calling in the a.m......... goodluck!
Tubby. Was wondering if you could pm me what the cost was? ThanksQuote:
Originally Posted by tubby
No wonder we needed larger inbox sizes.
Good insight Tubby
Sent from my SM-G928V using Tapatalk
Thanks everyone for the tips. I called today and they asked me to email my request in. (I anticipate they are getting a lot of inquires). Hopefully I hear Back.
Good to hear. It took 5 weeks to get the order shipped and I called weekly to follow up (squeaky wheel). Finally installed today and went flawlessly thanks to the help of 13mobiuslsv.
Has anyone put the autoflow 2.0 on an LSV yet? If so, how were the results?
There was a discussion on this sometime over the summer. Matt Brown chimed in, there's a kit I believe you can get ahold of through your dealer. To the best of my knowledge I've not seen anyone with a 2.0 or 1.0 for that matter on any LSV.Quote:
Originally Posted by Derrick
I know my dealer sold a 2015 LSV with Autoflow 1.0 last year. I have yet to find out who it is or how he liked it. I also know that Wakeland sells the 2.o plates direct if you have an LSV with the 1.o system.
Anyone know if this can be added to a 2008 XLV?
Sent from my iPhone using Tapatalk
Hi BrettLee, just wondering with this system if are you able to switch surf sides on the fly? Are the actuators fast enough?
Yea you can...but I'm not good enough yet haha. But it's plenty fast.Quote:
Originally Posted by reeder
Sent from my iPhone using Tapatalk
I was told by the mfr that they would in April.Quote:
Originally Posted by pslitty
Who should I contact? Mfg or third party? Thanks in advance!
Sent from my iPad using Tapatalk
They aren't great at replying, but:Quote:
Originally Posted by pslitty
http://www.wakelandmfg.com
I would honestly look into the Wake Makers Wave Control, you can follow my thread for more details.
It also has the ability to switch sides in 3 sec, comes with a rider remote so the rider can control the switch.
https://forum.moomba.com/showthread....s-Wave-Control
I spoke with the Wakeland guys a couple times with questions before I pulled the trigger. I didn't have too hard of a time getting a hold of them with the number on their website. I only needed to call them direct because the nearest dealer is new to Moomba and couldn't answer my questions. Based on the timeliness of the dealer's quote I'm guessing they didn't have too tough of a time getting ahold of Wakeland, but I will say it took some time to get the call from my dealer that the kit was in for install.Quote:
Originally Posted by pslitty
Wakeland can't/won't sell direct to you, so the best course of action is to hit your dealer up and see what it will cost to have them install the system.
Wakelands system is what the factory uses for OEM, but it does not have the wireless remote for switches. Pretty sure it will be cheaper though, even after install.
I'm leaving tomorrow AM to take my Mojo to the dealer to have it installed. Will update with any good, bad or ugly once it's complete.
Install is complete, have yet to see it in person but the dealer sent a pic. Should be able to pick it up next week.
Before:
http://uploads.tapatalk-cdn.com/2016...35fd2431e5.jpg
After:
http://uploads.tapatalk-cdn.com/2016...d8ca806258.jpg
Looks good Chris, did you get the WakeLand Surf Control? Or just the standard Auto Flow toggle switch?
http://uploads.tapatalk-cdn.com/2016...49171a2714.jpg
Sent from my iPhone using Tapatalk
Not 100% sure, haven't picked it up yet, but I was expecting it to have the wakeland control you posted.
I like the look of that compared to the toggle switch. I hope they switch to that in 17.
Sent from my iPhone using Tapatalk
Looks cool. Just had the same 2.0 install on a 2014 LSV, along with a 450lb bow bag linked to the IBS. Both the dealer (A&S Boats in CT) and SC were great. A nice 1/2" shim on the swim platform so that it could clear the actuators, rather than cutting the platform.
Please get us other LSV owners some good pics.Quote:
Originally Posted by griffousa
Travelling this week, but will take pictures and post on my return this weekend.
Today I received my Autoflow 2.0 surf tabs for my 2015 Mondo. Looking forward to the 'extra push!. Travis from Wakekand assures me there is a noticeable difference. When things warm up I will post pics.
You'll like it. I immediately noticed more push in the wave.Quote:
Originally Posted by yukon2007
Did you order from wakeland? How long did it take? Thinking of getting a slightly used 2015 and will probably do that upgrade if I do.Quote:
Originally Posted by yukon2007
I ordered from Wakeland and it took about three weeks. Where I was really impressed with was the packaging. They really took the time and effort to ensure they would arrive in perfect shape.
If you (or anyone else) are interested I am selling the old ones for $100.00 plus the actual shipping costs. You could take them to a fabricator and have them weld to the bottom an aluminium plate that reduplicates the size and shape of the new Auto Flow 2.0 plates. It would be substantially cheaper than buying new surf tabs.