Heater Group Buy #2

I have a list of those intreseted. We have 3 fully in at this point and I have a long list of those that are intreseted but don't know were you guys are at. The only feed back so far is to do it near the end of March? That is fine with me.

One's that are in

Matt Glenn - 4 vent
Jeremy( centurion crew) 4 vent
thedug - 4 vent
bodybou- 4 vent ?


Post that have intrest( if you are in please send me PM of your info and what you want)

jpattigar
tp121
dokken
Lawdog
mrskidoo
surfmoocher
grantm
mastercraft
walb0244
macattack

I'm in for sure with a 4 vent. Do you think they will let me get with 4 hot tubes instead of 3 and 1 fixed.

March is fine with me. Just let me know when and what I need to do

Quote:

---

Originally Posted by mrskidoo

I'm in for sure with a 4 vent. Do you think they will let me get with 4 hot tubes instead of 3 and 1 fixed.

March is fine with me. Just let me know when and what I need to do

---

yes, it cost a little more...

matt

march is also fine for me!
and yes I'm looking for a 4 vent

I'm in for a 4 vent. When I call and order mine I'll talk to them about doing all four the hottubes. So I can see how much extra it is to do all 4 hottubes. Either way I'm still in for a 4vent heater. March will be fine.

email: brandon(dot)waldrop(at)us(dot)army(dot)mil
phone: 812-243-4593

Matt: tks for getting this all together, especially since the other boat site I belong to won't let us do group buys:((

I will post the prices over there; I 'm sure you will get some more buyers!

I vote for ordering as soon as possible, so we can get it installed and ready for early spring skiing!

Clarification: Once we pick a week and call in our order to Heatercraft, they will wait until Friday to charge our cards based on the number of orders. Say we do not get 10 orders, do we get a chance to opt out at that time or do we have the pay the extra $100 or so for the smaller order number??

Ref shipping costs ($25-$30), it looks like $18 UPS ground to central Florida.

My info: b52colmac at aol dot com; 352-589-8823

tks again, mac

Just a note of encouragement to you guys who are lining up to get a heater. It is a fantastic creature comfort and hard to overstate how much it is appreciated on those cold or cooler days. Without fail it will put a smile on the face of your crew. The heater on my Outback DD is one of the best factory options I ordered. If you are on the fence about this, just do it. And let's see the install pics.

Macatack, I will ask Danny that but I'm hoping we will have so many people in that if a few drop out we will still be good man. I think end of Feb / march would be good giving others time to jump on board. What about the 1st week in March?

Hey Matt: the 1st week of March sounds good, as I said, the sooner the better. Maybe if we get 15 or so comittments in the next week or so, we can pull the trigger earlier? Would like to get this "winter" project complete soonest:)

I know you mentioned this kit would satisfy the Vdrive folks, but are we paying extra for that or for the DD guys is there another kit available. Maybe it doesn't matter in the big scheme of things; guess we are only talking about the length of the water hoses to where you mount the heater box??

Is there any reason this 4-vent kit number (337H4CXL)is not listed on the Heater Craft website?

Add me to the 4-vent kit list.

tks again for working, mac

Quote:

---

Originally Posted by Matt Glenn

Number 314HCHXL ( These are complete kits) every thing you need plus these are all the XL kits so they will have plenty of extra length for you v drive people. He said you will not find these on the web they are not on website.

10 or greater ( between the two types) : 323.50

5-9: 422.50

Less then 5 is retail 530.50

4 vent ( same size box just one more hot tube )

10 or greater :$347.50

5-9: $459.75

1-4 retail: 559.00

Shipping is around 25-30 he said at heater craft

---

Great prices. I paid $396 for my 3 vent complete kit with 3 pull out hot tubes.

BTW, below is a link to my install if you are interested in seeing what is involved:

https://forum.moomba.com/showthread.php?t=10840

This is the list of peps that are for sure in. If you want on board either post email or pm me your email and I will send out mass email

1.Matt Glenn
2. The Dug
3. Jeremy
4. Bodybou (need e-mail)
5. Walbo244
6.Macattack
7.mrskidoo (need e-mail)
8. TP121 (need e-mail)
9. Lawdog (need e-mail)
10. dunkken

I'm also up for doing this sooner then later as long as all these people are for sure in, we have one shot at these great prices guys.

We have 11 people on board and i'm playing with the idea of bumping up buy to feb sometime as long as every one is kool with that. Still need mrskidoo e-mail if in.

So this I guess is last call for next couple weeks on group buy. If any one else wants in pm me with email and name.

I'm for it, the sooner the better!!!

count me in for 4 vent

anyone DIY these in a 06 to 08 OBV or a pre 06 lsv.? the space looks really tight.....

I'm ready when everyone else is ready. Just let me know when we are doing this. :D

Quote:

---

Originally Posted by jmvotto

anyone DIY these in a 06 to 08 OBV or a pre 06 lsv.? the space looks really tight.....

---

I'm back and forth about doing this with my main trouble being space. I'd really like to hear an answer to JMs question as well.

I would call your dealer and ask them if they could put one in and how many vents you could get. this will tell what you can get because all most all the heaters are heater craft in boats. You could call heatercraft if you want, but I do not think they will tell you what will or will not work.

We are looking at bumping up group buy to maybe 2nd week in feb so please try to make up your mine soon man

I'm 100% ready for this, I've been on the fence for QUITE some time, but this has been given the green light ASAP by the wife! At the 10+ level, of course

Heard about this on the Centurion Forum.

Eric Silva
Ericjohnsilva AT gmail.com

Please let me know when I can give the nice folks at Heatercraft $$$

What is the price they are offering? I believe I saw thatyou can get these for $343 for the three vent online. Seemes like a pretty small discount for the volume (10 or more).... if it is as I read in past post ($325ea.)

I dont know any complete heater systems on line that have 2 pull out tubes and 1 fixed. These are $460. If you know what you are doing then Buy all means try to find a better deal. Others have posted this to me but all vents are fixed and not same btu of power. We are a good to go on this with 12 people, so if you dont want one from the fact. no big man

If you are not in yet please send me your email if you want in Order might be going down next week.

Quote:

---

Originally Posted by jmvotto

anyone DIY these in a 06 to 08 OBV or a pre 06 lsv.? the space looks really tight.....

---

bump, anyone do this to the smaller boats

My '02 OB LSV, a 3 port heater. 2 Hot Tubes and 1 euro. It was mounted on the hump.

If any one is interested in group you need to make up your mind now. It is going down next week ( Mon the FEb 7th)

If you are in please send me your name and cell number to [email protected]. For those that are in and have not contacted me v email that next week is good please do ASAP.


Pricing and info is list in above post

Quote:

---

Originally Posted by mcdye

My '02 OB LSV, a 3 port heater. 2 Hot Tubes and 1 euro. It was mounted on the hump.

---

Did you install it or did the dealer?

JV - don't know if this will help you, or not, but I have a 2011 Moomba catalog on my desk and it shows under "Miscellaneous Options" that a "Heater w/ Two Nozzles" is an available option on both the Outback and the Outback V.

Quote:

---

Originally Posted by jmvotto

Did you install it or did the dealer?

---

According to the previous owner, it was factory installed. It was a loaded rig including shower.

Drew & Mcdye. Thanks for the input. I know it will fit but not sure if I can wiggle myself over the sub hump or under the bow cushion to install this luxury item...:D

I've read a ton of heater install threads on our MC forum. Overwhelmingly, everyone suggests purchasing the Y-pipe which brings the return line to the raw water intake rather than the circulating pump...this setup will provide significantly more heat at idle. Heater Craft sells the Y-pipe for $40 and SKIDIM for $34.

Matt: I wonder if HeaterCraft will also give us a group discount on this part? Please let us know...tks, mac

http://www.heatercraft.com/ProductIn...productid=H424

http://www.skidim.com/prodinfo.asp?number=H424

Saw the link on the MC forum. Sent you an email matt. Count me in on the 4 vent one.

Joe

Orders are going in Next week ( After 12pm on MON) for those that have not contacted me and Want to Buy one of the 3 vent or 4 vent heaters please call Danny at Heatercraft 208-687-4400 Ext 224 and tell him you are with the MOOMBA GROUP and he will take your order

Quote:

---

Originally Posted by macattack

I've read a ton of heater install threads on our MC forum. Overwhelmingly, everyone suggests purchasing the Y-pipe which brings the return line to the raw water intake rather than the circulating pump...this setup will provide significantly more heat at idle. Heater Craft sells the Y-pipe for $40 and SKIDIM for $34.

Matt: I wonder if HeaterCraft will also give us a group discount on this part? Please let us know...tks, mac

http://www.heatercraft.com/ProductIn...productid=H424

http://www.skidim.com/prodinfo.asp?number=H424

---

I have one that i didnt use. I just used the MC Valves on the block.. If anyone wants the y valve let me know I will save you a little coin.... The issue would only arise at idle and it seems from the people here they dont have any problems.....

Anybody else think that $40 for a brass y pipe is alittle much?

Quote:

---

Originally Posted by walb0244

Anybody else think that $40 for a brass y pipe is alittle much?

---

yes but if you are idling a lot the water pump is pulling water thru the heating system... So if you have problems with your 400 heating system at idle then whats another 40....

1st day of group buy and we have ten people and I know there is more to call Danny. So for all those on the fence you get the best price at this point no matter what. You have intill Thur this week to jump on board. For those that wanted the Y bras fitting to increase heat output at idle I got the price down to $28. Call Danny at Heater Craft at Ext 224. His number is in prior post or just look up number on web. He will be in office from 8am-4pm PST.

Got my order in this morning, thanks for all your hard work!

Anyone have any idea how to hook this up on one of those nasty Mercruisers?

Thanks!

ordered my heater today thanks for all the work putting the group buy together matt... glad i didn't buy this last year cause it really saved me some money!

Just ordered my heater. Glad we got so many people already so I don't have to worry about the price going up because some people backed out. :D Also, ordered the Y fittings. Thanks again for putting this all together.

There is still more time to get this great price. You have until This Thur To call Danny at Heater Craft to Order Your Heater. We have 19 and counting so far that have got this great deal guys. Contact and info in prior post.