Flow/Surf plates calibration?

Any way us common folk could get a look at that video SC sent to train the dealers???[emoji2958] I am 3 hours away from closet dealer, who still owes me a mirror for over a year now.

Sent from my SM-G781V using Tapatalk

Probably not related to what Toymchn is experiencing, but I have noticed that switching sides surfing throws the percentage of deployment that shows on the screen off for one or both tabs. I then have to cycle the tabs from 0-100 a few times to get them “registered” correctly. I don’t use the toggle switch to switch sides anymore and only use the soft buttons on the screen and haven’t experienced the problem again.

Quote:

---

Originally Posted by Bigs28

I use Orlando nautiques as well and hopefully you have a better experience. They are terrible.

---

So far our experience has been good. I reached out to them yesterday about my 50hr service, some additional work I’d like, and obviously the issues I’m having with the surf tabs so we’ll see how all is handled.

Quote:

---

Originally Posted by haknslash

Woah your left plate went to increments of 2 for a second there at the end. WTF! Mine only jump by increments of 5nbut I also don’t have the fancier larger screen to see those secondary (I’m guessing actual) numbers compared to set number amount.

---

Yes it would move in increments of 4 randomly from, say, 65 to 61. But then on the next press it would move by 6 from 61 to 55. It’s been acting strangely. Hopefully I can get this straightened out