Printable View
I hear you brother. They touted their powder coating as a huge advantage to the BM. If I had a DeLorean and could hit 88mph, I'd order a BoatMate instead.Quote:
Originally Posted by sandm
However...
Right now I'm more concerned about the legality of this trailer. God forbid, if something were to happen, I wouldn't an adjuster or (worse) lawyer claiming I was accountable or negligent for loading my trailer substantially over it's stickered max GVWR.
As others mentioned, you got to clarify with both the trailer manufacturer and also the dealer. With MB, the Boatmate trailers are 10K, do dealers order trailers from whoever is their preferred vendor. Our MB Came on a Phoenix trailer, and I was also skeptical, but after a close inspection, it appears to be an upgrade from Boatmate in terms of how well it's built, and the components.
I very much doubt that the dealer would put the boat on an underrated trailer, but anything is possible....
I will say the limiting factors on a trailer are axle load rating and Tire load rating.
The welded box frame will not be your limiting factor. The metal craft frame doesn’t look any smaller than the steel that Boatmate uses.
Sent from my iPhone using Tapatalk
all the ambulance chasers down here would start with you until they found out you paid for and picked up what was legally sold to you. they culpability will fall on the dealer or metalcrap. they would be the ones that married up the boat/trailer-I would even go so far as to say MB is in the clear like you since they didn't spec the trailer. same thing for tige with our 22ve. the dealer in Idaho Falls spec'ed the trailer to the boat not us or tige. all you did was pay for and pick up what should be a "legal" combo.
I would spend zero worries on the legal side there.
You are on the right path asking and researching BEFORE anything occurs.
I have to think a call to your dealer and metal craft asking why trailer tags are underrated will raise some red flags. I also would not be surprised if the dealer is clueless on the matter.
On a side note, how many SC owners opt out of a Boatmate for another brand?
Does MB have a relationship with Metal Craft?
Sent from my iPhone using Tapatalk
I would say that you would more likely have trouble with some anal inspection station officer due to the confusing label, if you ever happened to have to pass through one for some reason, than you would need to worry about the trailer ever failing you mechanically from too much weight.
Sent from my SM-G781V using Tapatalk
Quote:
Originally Posted by larry_arizona
Nope. When you use the online configurator on MB's website, it's actually a BM. MetalCraft is used by my local dealer (the biggest MB dealer in the nation, who are actually pretty great). MC is about 30 minutes away, so I'm sure it's convenient, saves money, and increases dealer margin.
Another aspect I never even thought about.Quote:
Originally Posted by HFarr
I'm a pilot by profession and just like things done right and legal. Even if I was "assured" it was all good by the dealer and trailer manufacturer, I'd want a new placard. I paid six figures for this get up, I want it certificated properly.
Sucks the dealer chose margin over quality on the trailer.
Hopefully you get the answers you are looking for.
Sent from my iPhone using Tapatalk
They do have their manufacturing plants next to each other. Does not get much easier and closer for delivery when a boat is done.Quote:
Originally Posted by larry_arizona
Sent from my iPhone using Tapatalk