The rev10s are set up for highs only. You may need to adjust your amp a bit and possibly the head unit settings. Most of the time they are not tuned perfectly from the factory.Quote:
Originally Posted by vdubnick
Printable View
The rev10s are set up for highs only. You may need to adjust your amp a bit and possibly the head unit settings. Most of the time they are not tuned perfectly from the factory.Quote:
Originally Posted by vdubnick
i was assuming it could be crossover related, i will take a look at that. also going to double check phase for the 6'sQuote:
Originally Posted by RUGER761
Hey when you audio guys get your westsound systems tuned like you think they should be, let me know what the amp settings are. I believe I have the same setup with the ported sub, Rev 10 tower, and bow speaker system. I believe mine sounds pretty good. Even good bass out of the tower, but hey I am always up for improvements.
Sent from my SM-G781V using Tapatalk
This has been the woofer issue in Moomba boats since they first started offering Fusion media units. They leave them at the factory default. Making adjustments at the amp is like peeing up a rope.Quote:
and possibly the head unit settings
And, PLEASE to not expect to have or try to get "bass" from a tower pod. You will either end up with a blown driver or blown expectations.
MLA is the most correct.
Adjusting the radio adjust the input to the amp. Then adjust the amp to amplify the sound.
My Rev8s and all mid-bass and highs. Do not expect bass drops from the tower.
agreed and agreed... and dont expect dual 12 output from a single 10.
side note, looks like they ran 4channels to the tower... anyone add 2 extra speakers? im assuming they are 4 ohm, so you would double power and optimize the amp to run another pair in parallel.
Check the amp and wiring. My 2015 mojo had a 4-channel to the tower but it was bridged. The original owner had REV8s installed and this is what they did.Quote:
Originally Posted by vdubnick
I believe you will find that the OEM tower amp is a Wet Sounds Syn-DX4 bridged to 2 chnls, so its at its capacity. Cant add additional speakers to it.
I'll let you know mid-next week when I pick mine up!Quote:
Originally Posted by letitsnow
Your correct its at capacity. He would need an extra amp to add more rev10s.Quote:
Originally Posted by MLA