Steering cable and install

Quote:

---

Originally Posted by Holdmybeer

2 hand grip to stay straight while surfing? That is rough.

How much weight are you running? And where is it all positioned. If I'm too bow high steering is harder, but not like that.

---

1200's rear, but sometimes less in order to get my 9 pitch. 1000's midship, 1000' center and 0-500 front.

I fill all these different to get my pitch and role to 9 and 0 - -2

Side tabs work, and leave at 100% and middle plate works and 0-25%

Wave is great....long and medium height.....I go a little steeper for one of my teens who like it steeper.

yes 2 hand grip.....now you know what I mean.....nuts. And it was this way when I had a stock set up and immediately took it back to the dealer, who checked it out and said everything was fine. I truly just don't get it. After 2 summers of this, and 4-5 trips to 2 different dealers, I am sort of giving up and about ready to buy a new boat. I will get a Moomba, because I like them, but if production wasn't so far behind, I would have bought a new one by now and traded in this boat to one of the dealers who said everything was fine. So I feel what the heck, lets change out the cable.

I know when my boat is set to surf regular, it’s nearly impossible to turn boat left and when set goofy it’s near impossible to turn right at low speed to get rider.

My guess is a tab is deployed or stuck


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by rockymtnsurfer

1200's rear, but sometimes less in order to get my 9 pitch. 1000's midship, 1000' center and 0-500 front.

I fill all these different to get my pitch and role to 9 and 0 - -2

Side tabs work, and leave at 100% and middle plate works and 0-25%

Wave is great....long and medium height.....I go a little steeper for one of my teens who like it steeper.

yes 2 hand grip.....now you know what I mean.....nuts. And it was this way when I had a stock set up and immediately took it back to the dealer, who checked it out and said everything was fine. I truly just don't get it. After 2 summers of this, and 4-5 trips to 2 different dealers, I am sort of giving up and about ready to buy a new boat. I will get a Moomba, because I like them, but if production wasn't so far behind, I would have bought a new one by now and traded in this boat to one of the dealers who said everything was fine. So I feel what the heck, lets change out the cable.

---

Next time out. Fill everything but make sure your tabs and center plate are all retracted up. I know the wave will suck but just curious if others are correct and the tab is causing all the problems with your turning. You say tabs are at 100%. I heard most having the tabs at 60% regular and 80% goofy when surfing, this could be your steering issue. Weighted that heavy and low in the water plus 100% tab is a lot of drag. But trust me, I understand wanting that perfect wave.

The cable is not priced horrible, but the time lost to change something that may or may not have affect on your problem, would be the killer. I have thrown money at problems with cars, houses, etc. and its great when it fixes it but when it doesn't it just leaves you more frustrated.

I was thinking the same, the further down the tab is (higher %) the more steering force you're going to see from the tab.
Try it around 60

I will try all the sudgestions tomm when I am on the lake. I appreciate peoples thoughts........this is frustrating. The only reason I have gon full port and starboard tabs was from all the wave set up people sudgested it. Center plate is never at 100% and i just try to nail the righ pitch and role, but I will try to hit the same role tomm with 50% tabs first.
Thank you

Keep us updated. I hope it is something simple like this.

Quote:

---

Originally Posted by Holdmybeer

Keep us updated. I hope it is something simple like this.

---

I was just thinking the same thing! I will kick myself for not trying it sooner if it is the case....but I would rather kick myself than continue with this issue

Steering cable it was. I replaced it and it now is better than ever. After the adjustment of the rudder, I have a knock all the way to the left when I fully turn it, and its soft with no knock when I turn it fully to the right. I know what it is, as I set it up, but if I set it up for a knock on bothe left and right, the rudder is not equal turning on both sides. But at this point I am happy to be able to turn with one finger while surfing.

Awesome.

Based on your comments, you did the work, not the dealer. Was the dealer able to get you the cable under warranty?

Not sweating sub $200 fix when you could have been without your boat for 2-3 weeks....Just curious if SC would reimburse you for the parts.

Quote:

---

Originally Posted by Holdmybeer

Awesome.

Based on your comments, you did the work, not the dealer. Was the dealer able to get you the cable under warranty?

Not sweating sub $200 fix when you could have been without your boat for 2-3 weeks....Just curious if SC would reimburse you for the parts.

---

To be honest, I was so psyched that I didn't even consider it. Being they are 5.5 hrs away and $4.30 a gallon.....to take it in was out of the question and dealing overthe phone and shipping ect.....was not worth my time either. Just psyched I am still on the lake and solved the problem.
D