IF they have not been replaced its probably the post Cat Sensors. They no longer make them so you have to cut the wire and put a resistor in place to take it out of limp mode.
Printable View
IF they have not been replaced its probably the post Cat Sensors. They no longer make them so you have to cut the wire and put a resistor in place to take it out of limp mode.
Do you have a part number for the ignition module. I have a 04 XLV I'm needing to change the module. I wasn't sure if it had to be marine or not.
I just replaced the ignition control module on my 04' Supra with the assault 320 TBI. I bought it from Inboard Direct Online, and when I received it the part number crossed over exactly to a Standard Ignition Products module # LX-384. I bought one of those as a backup to carry in the boat as it takes about 10 minutes to change it. Got it from Rock Auto for $47.00 I believe.Quote:
Originally Posted by treverspence
This is the same module that fits most of the Mercruiser, OMC, Volvo 5.7 engines. I have been told by several sources it is not exactly the same as an automotive module, but I didn't design it so I can't verify that one way or the other. I didn't want to take a change and damage the ECM if it wasn't designed for it.
wires from a car would work fine