There seems to be plenty of leg room. But an idea to get it tucked into the corner ...Quote:
Originally Posted by 5:00
https://uploads.tapatalk-cdn.com/201...704774483d.jpg
Sent from my SM-G928V using Tapatalk
Printable View
There seems to be plenty of leg room. But an idea to get it tucked into the corner ...Quote:
Originally Posted by 5:00
https://uploads.tapatalk-cdn.com/201...704774483d.jpg
Sent from my SM-G928V using Tapatalk
awwwwww . . . . .Quote:
Originally Posted by KG's Supra24
Dusty tucking you in again.
Sure are! https://wetsounds.com/pages/products/WS-420KIT.htmlQuote:
Originally Posted by 5:00
That is one expensive azz mount...it is half the price of the EQ itself.
LOL, not really. Price out the amount of the aluminum billet, then the amount of CNC time to mill each piece, then add in the coating. Ive had smaller, less complex parts milled. The cost is actually real reasonable for what you get.Quote:
Originally Posted by Prospersigman
SO, I have the same dash and would like to get it just like that, but -- I swear mine isn't horizontal like it seems in that pic. Messing around I though it seemed you could put some backing or spacer material in there but it seemed like that would crack the dash over time? Moving left to right under the "cubby" and surf switch the bottom of my dash is sloping up.Quote:
Originally Posted by KG's Supra24
Same here, just picked up a ws 220bt and will try a diy install soon. Any chance of some close up pics of the rear of your install?Quote:
Originally Posted by KG's Supra24
Attachment 25403Attachment 25402
This is mine.
^ I like that.
I don't have any pics of the backside. It will still be a bit before I get back to the boat.
I was toying with the idea of using that real estate, but that is a big commitment to cut the fiberglass. When in that location, did you have trouble fitting the EQ with the rear inputs, etc. -- in between the inner cabin wall and the outer hull? My guess is that it a little tight?Quote:
Originally Posted by lsupcar