Good luck guys. Next Saturday is install day for me. The only thing I'm worried about is the electrical. (it took me two weeks to figure out the relay thing last year) Please post some electrical progress pics. Thanks, Jamie
Printable View
Good luck guys. Next Saturday is install day for me. The only thing I'm worried about is the electrical. (it took me two weeks to figure out the relay thing last year) Please post some electrical progress pics. Thanks, Jamie
You using a existing dash switch OR the HC switch provided?Quote:
Originally Posted by jamie_abb
If using the existing dash switch, the electrical part is a snap
+1 for the driver's footwell. I only have a three outlet and I find myself using one of the walkway pullout hoses to keep warm while driving. I bought a "Y" this winter and plan to install an outlet under the dash someplace so I can have warm air blowing at me and keep both hands on the controls.Quote:
Originally Posted by jmvotto
You'd have to go all the way around the bow to get the hose next to the built in cooler and by then, I think you'd have lost a lot of CFM. The pull out behind the driver's seat will cover the entire back seat, from corner to corner. I have a pic showing this in my install thread.Quote:
Originally Posted by walb0244
Some had asked, here are the images from my install.
Dash is full, had to use HC switch. Did not really want to put it by the vdrive warning and kill switch since they were centered on the throttle, maybe too anal :). Could not find locally a CB, so installed inline fuse.
I have the mystery switch (most right switch) which I'm assuming I can use.Quote:
Originally Posted by mcdye
Hopefully, it's a two position switch so you can hook up medium and high. Mine used to be the ballast switch so I just ordered the heater switch faceplate from the dealer ($5) and used the switch. Pic below.Quote:
Originally Posted by jamie_abb
http://i250.photobucket.com/albums/g...7/IMG_6406.jpg
http://i73.photobucket.com/albums/i2...s/IMG_0101.jpg
here are where i installed the tubes.. I got 4 pull out tubes... i didnt want to have to pull a tube out from underneath the dash if someone else wanted it... the way it is the driver can use it or someone in the backseats could use it as well
Thta's mine minus the nice heater badging.
Quote:
Originally Posted by cab13367