heater switch

Quote:

---

Originally Posted by wolfeman131

JV - you have a granite topped workbench?!?!?

high class, baby. high class.

---

Nope, they garage pics did not come out as well so i shot them again in the kitchen:D wife was sleeping so i got away with one...

Joe,

That's interesting because I used the stock GI ballast switch, changed the faceplate out to the heater faceplate, and am using it as a heater switch. So were you able to use the heater switch as a ballast switch?

Al

Never mind - reread your post. Looks like you are using this as a heater switch and was just pointing out that it's different than the ballast switch. Got it.

Quote:

---

Originally Posted by cab13367

Never mind - reread your post. Looks like you are using this as a heater switch and was just pointing out that it's different than the ballast switch. Got it.

---

yep I ordered it directly from SC through the dealer. Now my real decition is to move the g1 to the g1111 location and replace the heater switch in the dash. or just mount the heater craft switch and have all three speed settings.
:confused:
any pro con input would be great

Quote:

---

Originally Posted by jmvotto

yep I ordered it directly from SC through the dealer. Now my real decition is to move the g1 to the g1111 location and replace the heater switch in the dash. or just mount the heater craft switch and have all three speed settings.
:confused:
any pro con input would be great

---

I'd move the GI switch and use the factory heater switch for a factory look. I hooked up the med and high settings. I don't ever wish I had the low setting and in fact, I don't think we ever use the medium setting. It's on high or it's off.