Printable View
Great looking boat! I really like the accents!Quote:
Originally Posted by RC_Hinojosa
I am currently in the process of ordering a boat from Rinkers and I was wondering how well were they able to match your REV10s to the boat? Has the paint held up well on them? I am just concerned that since I am ordering my boat with the tower accents white that they won’t be able to match the white perfectly and that will drive me nuts. TIA
Thanks, the color matched REV10s and bimini arms add a pop of color on the tower and receive a lot of compliments.Quote:
Originally Posted by TXSurf4
Rinker's did a phenomenal job with the color accents and will take care of you, they have the PPG codes from SC and the Sundance Yellow is totally spot on. After two seasons, the paint has held up extremely well but I also protect the REV10s with Speaker Sox when not in use.
Just make it clear which white you are wanting to match (gel coat vs tower accent) just in case there are tonal differences between the boat and the tower.
Good to know Thanks again!!Quote:
Originally Posted by RC_Hinojosa
....spring upgrade time, sexy ass surf pipe [emoji41][emoji1690]https://uploads.tapatalk-cdn.com/201...b062877e82.jpghttps://uploads.tapatalk-cdn.com/201...72e10728a4.jpg
Sent from my Note9 using Tapatalk
Nice!! Looks great!!! How was the install?Quote:
Originally Posted by RC_Hinojosa
Sent from my iPhone using Tapatalk
Install was a breeze....Rinker's took care of it for me [emoji57][emoji23]Quote:
Originally Posted by TXSurf4
Sent from my Note9 using Tapatalk
LOL!! Those are the easiest!!
Sent from my iPhone using Tapatalk
Figured I'd revive this old thread....
Installed an ACME 2937 15 X 11 prop and can't wait to try it out with the boat slammed.
Hat tip to David for letting me borrow his prop puller!
https://uploads.tapatalk-cdn.com/202...87b78cf34d.jpghttps://uploads.tapatalk-cdn.com/202...d489dd5d97.jpg
Sent from my SM-N960U using Tapatalk
Sweet!! I know you are running slammed so I assume this is to help you with all that weight?
Sent from my iPhone using Tapatalk
Yessir.Quote:
Originally Posted by TXSurf4
The OJ 945 15 X 13 was good with Enzos & lead but kinda struggles when I add a 1000lb sumo sac. It can barely get to 11mph.
I told the ACME rep I primarily surf and run around 5,600lbs of ballast, the 2937 was the recommendation even though Wakemakers prop-finder suggested the 2419 15 X 12.
We may not have high altitude but the rep reminded me our hot humid air is a heat soak for the Raptor.
I'm guessing I'll top out around 27-28mph but I don't really care about that.
My crew tends to run on the small side so we sack it out.
I hope to do some water testing this weekend [emoji1687]
Sent from my SM-N960U using Tapatalk