[emoji23]Quote:
Originally Posted by Prospersigman
Sent from my iPhone using Tapatalk
Printable View
[emoji23]Quote:
Originally Posted by Prospersigman
Sent from my iPhone using Tapatalk
Frankly, I want my boat maker to focus on making boats not trailers.
Not a fan of in-house everything.
Sent from my iPhone using Tapatalk
Yes mastercraft and malibu are making trailers in house, but that doesent mean that every dealer orders trailers through them. To my knowledge, a ton of dealers will order those two makes with no trailer and then have baotmate make the trailers for them, an thats especially true in cases where the dealer also caries another towboat whos factory trailer is made by boat mate. Reason being? cost.
I will second this.Quote:
Originally Posted by larry_arizona
This may have been answered, but is Skiers Choice going to offer rear storage and engine tray bins for all the new boats or just some of them. For both Moomba and Supra?
The SA needs an engine tray. Tons of room above the engine. One of the negatives of the SA is storage when ballast is full.Quote:
Originally Posted by KnoxMojo
Sent from my iPhone using Tapatalk
For the 2019 Moomba line, Max, Craze Pro, and Makai have them.
Drew was talking about that subject a few weeks ago. Sounds like more boats will have them in the future.
Not sure about the 2019 Supra line.
Sent from my iPhone using Tapatalk
Pretty cheap to design and make via thermoforming
Sent from my iPhone using Tapatalk
If Craz Pro has them then they should be available to purchase.
Sent from my iPhone using Tapatalk
My dealer has a call into Skiers Choice about one for my 18 Craz as of last Friday. I will report back as soon as I find out. If they can’t get one, I am going to make one.Quote:
Originally Posted by Stazi
Sent from my iPhone using Tapatalk
Quote:
Originally Posted by MJHSupra
If they have them for the Max and Makai, they would have to be pretty close to the same thing as the SA and other boats with 102" beam.. I will see if I can get one off a boat at the dealer and fit it to the SA tomorrow.
Subscribed to what you find out.Quote:
Originally Posted by KnoxMojo
Sent from my iPhone using Tapatalk
The dealer said they are about 3 weeks away from being able to get pricing and sell them. Guess I will patiently wait.Quote:
Originally Posted by jcarter20
Sent from my iPhone using Tapatalk
So no tray yet for the Mojo? I wonder how far off the Craz dimensions are from the Mojo.
Hey guys. The new tray that fits the Craz Pro, should also fit the Craz and Mojo and should fit for the last several years. To be completely honest, this tray was one of the last additions for the year and we are still a little hand to mouth making sure we have enough for production. That is why we have been fairly "vague" about availability. BUT, if you want one, you should contact your dealer asap and get them to order it. We are a manufacturing facility first and parts department second. I have informed the purchasing and customer service department about the possible demand for this since it fits so many boats already in the field, but we have NO idea how to forecast for that so they have started building "some" extra, but until we get actual orders, we don't know how many we need. So, if you get orders in, we can get a better idea of how many we need to get and stock. Hope that makes sense. Your dealers should now be able to get a firm price on their end and we can start delivering a few at a time, but all that depends on how many actual orders we get.Quote:
Originally Posted by cpropes2005
Goose,
Any tray options for an 18 SA?
Sent from my iPhone using Tapatalk
Sorry Larry, we didn't do any tray options for the 2018 SA. The Supra and Moomba "H-bar" in the center sundeck are quite a bit different in size and shape so I don't think the Moomba solution will work on the Supra. And for 2019, we changed the entire rear of the SA to include the new walkacross so you can't use a tray on a 2019. And like I said before, we typically spend most our time working on new product as the product changes and that is why we didn't tool up a solution for the 2018 SA.
Hope that makes sense.
Quote:
Originally Posted by larry_arizona
Hey Goose. Do you know how deep the tray is? I called to order mine and it is fairly pricey. Just want to make sure I can get ropes and a life jacket or two in there before I order it.Quote:
Originally Posted by goose
Sent from my iPhone using Tapatalk
Would they fit a 2016 Helix?Quote:
Originally Posted by goose
Sent from my iPhone using Tapatalk
Attachment 27557Quote:
Originally Posted by jcarter20
Here is a pic of the tray that David Langston has in his boat. He can probably speak into actual usage of the tray more than anyone at this point...
He sent me this picture after he got his tray and he said in the tray he has a box anchor, shore spike, 4-12 foot docking lines, 1-100 ft anchor line, 1-50 ft anchor line, one tube rope, one wakeboard rope and handle, one surf rope and handle and about 6 bungee docking lines.
The tray is about 35 inches long and 28 inches wide. It is about 5.5 inches deep in the middle. Hope that helps. I haven't checked to see if it will fit in a Helix, but I will check later today...
Holy moly! These will hold a box anchor?! How sturdy/thick are they? The one in my Axis was paper thin, only trusted a wet jacket and a couple dock lines in it. Are they rated for any weight or is he just getting lucky with that much weight in there? Are the side tubs just as sturdy? Sounds like a great use space that’s much needed!
Perfect. Thanks. Mine is on order!
Sent from my iPhone using Tapatalk
It’s pretty thick, probably around 1/8”. It had no problems hold my small box anchor in addition to all the other items listed in Gooses post.Quote:
Originally Posted by That Guy
Sent from my iPhone using Tapatalk
This looks like an awesome addition. Where did you order it from?Quote:
Originally Posted by jcarter20
From your dealer - per the post from Goose (above)Quote:
Originally Posted by Isaguel
2018 SA would fit a 28x28 tray, any of the new trays in that ball park?Quote:
Originally Posted by goose
Sent from my iPhone using Tapatalk
Larry, I talked to my dealer, the issue with Supra is how the center support is made and the engine hatch is on hinges instead of a shock like Moombas.Quote:
Originally Posted by larry_arizona
The 28x28 fits between the hinges.
Sent from my iPhone using Tapatalk
I think there is more to it than that man, its the under side of the hatch as well for the walkover that is in the way when the hatch is closed.Quote:
Originally Posted by larry_arizona
Been looking at it tonight, 28x28x5” will work in the SA with some simple L brackets.Quote:
Originally Posted by KnoxMojo
Hatch will shut no problem.
A wash machine drip tray would work no problem.
I got engineering skillz....lol
Sent from my iPhone using Tapatalk
Build it!!
I will fab something and share when I have something decent.
I just want a warm tray to dry some vests, ropes or heat up some nachos.
Sent from my iPhone using Tapatalk
What about pizza?Quote:
Originally Posted by larry_arizona
Build 2!! I got $$! LmaoQuote:
Originally Posted by larry_arizona
Yeah, had they not offered something to buy I would have got something fabricated. I work in construction, so I was going to have one of my HVAC contractors bend up some sheetmetal. I saw on another post where someone then covered it with a bed liner material. Seemed like that would have worked also.Quote:
Originally Posted by larry_arizona
Sent from my iPhone using Tapatalk
Quote:
Originally Posted by Willyourun
Would love to know this answer
I checked today and I don't think it will work on a Helix. sorry...Quote:
Originally Posted by Dtbradly
https://uploads.tapatalk-cdn.com/201...25d7e06a39.jpghttps://uploads.tapatalk-cdn.com/201...8ab5f81410.jpg
Sent from my iPhone using Tapatalk
That exterior shot is awesome.Quote:
Originally Posted by padge
Sent from my iPhone using Tapatalk
so after crawling around the 2019 SL … there are a few things I like to comment on.
Positive:
- flip up seats in the back - cool
- access to water strainer/transmission - thank you - the 2018 hatch is too small - now you can get to pumps to replace impeller without taking the floor out first
- positioning front ballast pumps for better access - thank you
- additional notch in the racks for the bungee (for those who still have them)
- battery switch in the walk thru
Negative:
- battery switch cover - seriously? Ankle buster, banged up toes … I know that the cover matches the rest but sorry sticking it out right there???
- seat adjustment on the touch screen for moving back and forward? Maybe there is a reason that most car manufacturers are exactly NOT doing that? Don't know if the mechanical solution was prone to defects but I know that I move the seat back and forth quite often and having to do so via touch screen will be a PIA
- Overall touch screens - cockpit … coming from a Malibu prior to my SL I had one large screen and a smaller one to the side so I should be used to it but I'm not so convinced about the lower one - personally I think that the lower screen has too many different tabs (about a 3rd of the screen is used for the tabs to switch between the different functions …