Printable View
https://uploads.tapatalk-cdn.com/201...ffef2b79e5.jpghttps://uploads.tapatalk-cdn.com/201...d7ff8ea458.jpg Pretty sure the Camber board is a keeper. Effortless pop off a DD and Ollies r solid too. He said the landings also felt much smoother. Tomorrow he gets to ride behind a 211. Should be a great day!!!!
Sent from my iPhone using Tapatalk
Which cabin is that?Quote:
Originally Posted by russellsmojo
I've been up to BB twice, was there last month, beautiful lake!
Finally, don't like the three extra bags on the seats and floor, but.... that wave...https://uploads.tapatalk-cdn.com/201...36bdadd688.jpg
Sent from my SM-G930V using Tapatalk
Been doing a lot of garage boating working on a ballast system upgrade. I have about 1 hour left. So far I've added 2 reversible pumps to go along with one I installed a few years ago, tied in the ski locker bag with the bow bag, made the old drain line the vent for this system, upgraded to 1" hose/fittings, added vents for the rear bags (original g1 system so had to drill and add thru hulls), cut a hole to mount the switches, and added 3 timers. It's going to be nice to just flip switches and chill when it's time to fill and empty!!!
https://uploads.tapatalk-cdn.com/201...aebe77408d.jpghttps://uploads.tapatalk-cdn.com/201...de4c9deefd.jpghttps://uploads.tapatalk-cdn.com/201...36f3dc5d0d.jpg
https://uploads.tapatalk-cdn.com/201...816b46aee1.jpg
https://uploads.tapatalk-cdn.com/201...359787f1f3.jpg
^brackets I made with some diamond plate stock to mount the pumps
https://uploads.tapatalk-cdn.com/201...26372971e7.jpghttps://uploads.tapatalk-cdn.com/201...96e7db828e.jpg
Made quite a mess lol
I'm in the process of upgrading my ballast pump system too, fun times!
Tonight I'll be fabricating the bracket to mount a pump to the v-drive/transmission and drilling holes in the hull *cringe*.
I'm considering buying those timers as well so I don't have to worry about burning up the impellers.
http://www.xstreamdata.net/hosted-pi...a/no-floor.jpg
http://www.xstreamdata.net/hosted-pi...drive-pump.jpg
I don't like the idea of bare hose clamps next to my bags, so I found some 1.5" heat shrink tubing.
http://www.xstreamdata.net/hosted-pi...heatshrink.jpg
Looking good zd!!!
I just went camber, 15 bandwagon. https://uploads.tapatalk-cdn.com/201...3bd55d480c.jpgWaiting out the rain to try it.Quote:
Originally Posted by Stazi
Sent from my iPhone using Tapatalk
Quote:
Originally Posted by Ironcross25
Quote:
Originally Posted by Gqjeff
Sent from my iPhone using Tapatalk