Raptor Winterization

Quote:

---

Originally Posted by larry_arizona

On my 2021 400, I am installing on kit on the bottom of heat exchanger and the other on the lower hose T, both are equally hard to install on my SA. https://uploads.tapatalk-cdn.com/202...82807a1026.jpg
Adding extensions to locations 3 and 4 in figure 8.3.


Sent from my iPhone using Tapatalk

---

Bringing this thread back to life for a bit [emoji4]

I have two of these kits and want to install them but I can’t seem to figure out how to install it on the heat exchanger on my SA with the parts included in the kit.

Any help would be appreciated!


Sent from my iPhone using Tapatalk

The intent was to install into existing drain points, the fittings on the kit I bought were confirmed non compatible.


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by larry_arizona

The intent was to install into existing drain points, the fittings on the kit I bought were confirmed non compatible.


Sent from my iPhone using Tapatalk

---

Dang. Alright. Thanks brother. We have the same issue then. At least I got an extra blue plug out of it [emoji23]


Sent from my iPhone using Tapatalk

I called bakes and they said that drain hose kit is a bit misleading, I can't recall what it's actually intended for, but it won't work as a blue fitting extension.


Sent from my iPhone using Tapatalk

I wonder if I can source some fittings at Home Depot that would attach the hose to the heater. [emoji848]

I’ll keep you posted if I find anything


Sent from my iPhone using Tapatalk