If we have to remind you that you need a cooler of beer for an upgrade then maybe you aren't qualified to upgrade anything LOL.
Printable View
Took the platform off, lined up all the parts, attached the FAE to the boats exhaust, and then went through all the tools I had trying to cut that square tubing, then I remembered.... What am I doing, I've got a buddy who owns a truck accessories shop less than 2 miles away. Looked at my watch, 4:30... Loaded the boat up, pulled in at 4:45, explained what I was doing, (of course he had a more sturdy way of doing what needed to be done), unhooked the boat, me he said he'd get it done first thing in the morning.
He's going to weld a piece of angle iron in place where the square tubing would go, inside/between the two platform brackets, then remove the platform, drill the two holes in the angle iron to mount the FAE, but slightly lower so that there's no need to put holes in my swim platform. Sounds good in theory, guess well see when he gets done.
You may need the optional Moomba/Supra instructions.
My FAE fell off without it.http://img.tapatalk.com/d/14/02/25/8u2agysy.jpg
Sounds like your buddy with the shop gets the cooler of beer too. Earned it though.
Should the tail pipe be more straight up and down or is this about right?
http://img.tapatalk.com/d/14/03/04/syda2ypa.jpg
looks good and solid. don't forget to replace that missing screw going into the platform